*mydirectindustry

B3-852205-03000

Product catalog summary

Product Overview:
The BASICEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for detecting the refrigerant Opteon™ XP10 (R513a) with a measurement range of 0 to 2000 ppm. It is pre-calibrated, features low drift, and operates with a supply voltage of 3.3 to 6 V DC. The sensor supports Modbus ASCII or RTU communication and provides status indication via LED.

Applications:
This sensor is suitable for use in hotel air conditioning, food storage rooms, industrial refrigeration, food transport, and research.

Technical Specifications:

Measurement Principle: Non-Dispersive Infra-Red (NDIR), dual wavelength
Response Time (t90): Approximately 60 seconds
Digital Resolution: 1 ppm
Detection Limit: ≤ 5 ppm
Repeatability: ≤ ± 7 ppm
Linearity Error: ≤ ± 10 ppm
Long Term Stability: Zero ≤ ± 30 ppm, Span ≤ ± 40 ppm over 12 months

Environmental and Electrical Parameters:

Operating Temperature: -20 to +40 °C
Storage Temperature: -20 to +60 °C
Air Pressure: 800 to 1150 hPa
Humidity: 0 to 95% relative humidity (non-condensing)
Supply Current: Peak < 400 mA @ 3.3 V, < 240 mA @ 5.0 V
Average Power Consumption: < 800 mW

Installation and Calibration:
The sensor can be mounted using available equipment and supports zero and span calibration via software. It is recommended to recalibrate at first initiation and periodically based on application and ambient conditions.

Disclaimer:
All specifications are subject to change without notice. The data provided is for guidance only and does not constitute a specification or an offer for sale. Recalibration cycles are recommended for optimal performance.

Catalog excerpts

BASICEVO Infrared gas Sensor Refrigerant (Opteon™ XP10) R513a 2000 ppm smartGAS item number: B3-852205-03000 Pre calibrated Low drift Gas entry by diffusion 3.3 - 6 V DC supply voltage Modbus ASCII or RTU Status indication by LED Application examples Hotel air conditioning Food storage rooms Industrial Refrigeration Food Transport Research Available equipment Connect Interface Wall mount enclosure Calibration software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical installation Data communication also, as complete Transmitter

Open the catalog to page 1

BASICEVO I Refrigerant (Opteon™ XP10) R513a I B3-852205-03000 General features Measurement principle: Non Dispersive Infra-Red (NDIR), dual wavelength Measurement range: 0 … 2000 ppm Full Scale (FS) by diffusion (atmospheric pressure) Gas supply: Mounting dimensions: Warm-up time: 62 mm x 37 mm x 30 mm (L x W x H) < 2 minutes (start up time) < 11 minutes (fade in finished) < 30 minutes (full specification) Measuring response* Response time (t90): Digital resolution: Linearity error (straight line deviation): Long term stability (zero): ≤ ± 30 ppm over 12 month period Long term stability (span):...

Open the catalog to page 2

B3-852205-03000

B3-852205-03000

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures