*mydirectindustry

B3-772105-03000

Product catalog summary

Product Overview: The BASICEVO Infrared Gas Sensor is designed for detecting Refrigerant R507 with a measurement range of 0 to 1000 ppm. It is pre-calibrated, features low drift, and operates with a supply voltage of 3.3 to 6 V DC. The sensor communicates via Modbus ASCII or RTU and indicates status through an LED.

Applications: This sensor is suitable for use in hotel air conditioning, food storage rooms, industrial refrigeration, food transport, and research.

Available Equipment: The sensor can be equipped with a connect interface, wall mount enclosure, calibration software, and mounting equipment. It is also available as a complete transmitter.

General Features: The sensor uses a Non-Dispersive Infra-Red (NDIR) dual wavelength measurement principle. It has a compact size of 62 mm x 37 mm x 30 mm and requires a warm-up time of less than 30 minutes to reach full specification.

Measuring Response: The response time is approximately 60 seconds with a digital resolution of 1 ppm. It has a detection limit of ≤ 10 ppm and repeatability of ≤ ± 15 ppm. The sensor maintains long-term stability with zero and span deviations over a 12-month period.

Influence of Environmental Factors: Temperature dependence affects zero and span by ≤ ± 1.5 ppm and ≤ ± 3 ppm per °C, respectively. Pressure dependence is +0.100% of the actual reading per hPa.

Electrical Parameters: The sensor operates with a supply current of less than 400 mA at 3.3 V and less than 240 mA at 5.0 V. It features an inrush current of less than 450 mA and an average power consumption of less than 800 mW.

Climatic Conditions: The operating temperature range is -20 to +40 °C, with a storage temperature range of -20 to +60 °C. It can operate in air pressure conditions of 800 to 1150 hPa and ambient humidity of 0 to 95% relative humidity (non-condensing).

Additional Information: The document emphasizes the importance of recalibration depending on application and ambient conditions. It also notes that specifications are subject to change without notice and advises consulting smartGAS sales for specific requirements.

Catalog excerpts

BASICEVO Infrared gas Sensor Refrigerant R507 1000 ppm smartGAS item number: B3-772105-03000 Pre calibrated Low drift Gas entry by diffusion 3.3 - 6 V DC supply voltage Modbus ASCII or RTU Status indication by LED Application examples Hotel air conditioning Food storage rooms Industrial Refrigeration Food Transport Research Available equipment Connect Interface Wall mount enclosure Calibration software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical installation Data communication also, as complete Transmitter

Open the catalog to page 1

BASICEVO I Refrigerant R507 I B3-772105-03000 General features Measurement principle: Non Dispersive Infra-Red (NDIR), dual wavelength Measurement range: 0 … 1000 ppm Full Scale (FS) by diffusion (atmospheric pressure) Gas supply: Mounting dimensions: Warm-up time: 62 mm x 37 mm x 30 mm (L x W x H) < 2 minutes (start up time) < 11 minutes (fade in finished) < 30 minutes (full specification) Measuring response* Response time (t90): Digital resolution: Linearity error (straight line deviation): Long term stability (zero): ≤ ± 25 ppm over 12 month period Long term stability (span): ≤ ± 30 ppm over...

Open the catalog to page 2

B3-772105-03000

B3-772105-03000

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures