*mydirectindustry

B3-732105-03000

Product catalog summary

Product Overview: The BASICEVO Infrared Gas Sensor by smartGAS Mikrosensorik GmbH is designed for detecting Dichlorotrifluoroethane R123 at concentrations up to 1000 ppm. It features pre-calibration, low drift, and gas entry by diffusion. The sensor operates on a 3.3 - 6 V DC supply voltage and supports Modbus ASCII or RTU communication protocols.

Applications: This sensor is suitable for use in hotel air conditioning, food storage rooms, industrial refrigeration, food transport, and research environments.

Available Equipment: The sensor can be equipped with a connect interface, wall mount enclosure, calibration software, and mounting equipment. It is also available as a complete transmitter.

General Features: The sensor uses a Non-Dispersive Infra-Red (NDIR) dual wavelength measurement principle. It has a measurement range of 0 to 1000 ppm and dimensions of 62 mm x 37 mm x 30 mm. The warm-up time is less than 2 minutes for start-up, less than 11 minutes for fade-in, and less than 30 minutes for full specification.

Measuring Response: The response time is approximately 60 seconds with a digital resolution of 1 ppm. The detection limit is ≤ 10 ppm, repeatability is ≤ ± 15 ppm, and linearity error is ≤ ± 20 ppm. Long-term stability is ≤ ± 25 ppm for zero and ≤ ± 30 ppm for span over a 12-month period.

Influence of Temperature, Pressure, and Flow Rate: Temperature dependence is ≤ ± 1.5 ppm per °C for zero and ≤ ± 3 ppm per °C for span. Pressure dependence is +0.100% of the actual reading per hPa.

Electrical Parameters: The sensor requires a supply voltage of 3.3 V to 6.0 VDC, with a peak supply current of < 400 mA at 3.3 V and < 240 mA at 5.0 V. Inrush current is < 450 mA, and average power consumption is < 800 mW. It outputs a digital signal via Modbus ASCII/RTU.

Climatic Conditions: The operating temperature range is -20 to +40 °C, with a storage temperature range of -20 to +60 °C. It operates under air pressure of 800 to 1150 hPa and ambient humidity of 0 to 95% relative humidity (non-condensing).

Additional Information: The document notes that specifications are subject to change without notice and recommends recalibration at first initiation and periodically thereafter. For further details, users are directed to contact smartGAS sales or visit their website.

Catalog excerpts

BASICEVO Infrared gas Sensor Dichlorotrifluoroethane R123 1000 ppm smartGAS item number: B3-732105-03000 Pre calibrated Low drift Gas entry by diffusion 3.3 - 6 V DC supply voltage Modbus ASCII or RTU Status indication by LED Application examples Hotel air conditioning Food storage rooms Industrial Refrigeration Food Transport Research Available equipment Connect Interface Wall mount enclosure Calibration software Mounting equipment smartGAS Mikrosensorik GmbH I Huenderstr. 1 I 74080 Heilbronn I Germany T +49 7131 797553-0 I F +49 7131 797553-10 I [email protected] I www.smartgas.eu Available design in support Mechanical installation Data communication also, as complete Transmitter

Open the catalog to page 1

BASICEVO I Dichlorotrifluoroethane R123 I B3-732105-03000 General features Measurement principle: Non Dispersive Infra-Red (NDIR), dual wavelength Measurement range: 0 … 1000 ppm Full Scale (FS) by diffusion (atmospheric pressure) Gas supply: Mounting dimensions: Warm-up time: 62 mm x 37 mm x 30 mm (L x W x H) < 2 minutes (start up time) < 11 minutes (fade in finished) < 30 minutes (full specification) Measuring response* Response time (t90): Digital resolution: Linearity error (straight line deviation): Long term stability (zero): ≤ ± 25 ppm over 12 month period Long term stability (span): ≤...

Open the catalog to page 2

B3-732105-03000

B3-732105-03000

Catalog excerpts

All SmartGAS Mikrosensorik GmbH catalogs and technical brochures