GEM-Eye I
34Pages

II. About the SmartPro Gem-Eye I 05 3. READING TEST RESULTS 29

I. Introduction Congratulations on your new SmartPro Gem-Eye I with a remarkable designed Gemstone Tester with color stone estimator display for smoothly and seamlessly testing your precious stone and diamond. In creating SmartPro Gem-Eye I, professional engineers selected every material and element to have this fine-looking and effective tester that helps in the distinguishing between diamond and its other simulants using the principles of thermal conductivity. This device provides fairly consistent and reliable test results.

II. About the SmartPro Gem-Eye I The SmartPro Gem-Eye I it was developed remarkable design; color estimator to distinguish between diamond and its other simulants using the principles of thermal conductivity. It is to be noted that natural and synthetic gemstones have similar physical and optical properties. As such SmartPro Gem-Eye I does not distinguish between natural and synthetic gemstones. As with all thermal testers in the market, the tester is not able to differentiate between natural diamonds and moissanite. The SmartPro Gem-Eye I has been subjected to through factory quality...

The SmartPro Gem-Eye I features the following: a. High efficiency gem tester. b. Retractable thermoelectric probe tip that ensures constant pressure between probe tip and gemstone. c. Industry’s thinnest probe tip (0.48mm) for testing diamonds as small as 0.01ct. d. LEDs indicator. e. Metal alert LEDs with buzzer sound to ensure that probe tip is in contact with gemstone during testing. f. Easy-to-read analog panel display. g. No waiting time between tests. h. Automatic power off within 2 minutes (Sleep mode). i. Built-in diamond and simulant test discs for reference. j. Powered by AAA...

Included in your package: a. SmartPro Gem-Eye I b. Probe pen c. AC adapter d. User manual book e. Warranty card f. Protective carry case g. Probe tip oxidation sheet h. Metal stone tray

RICK OF ELECTRIC SHOCK DRY LOCATION USE ONLY SHOCK HAZARD NONSERVICEABLE PARTS INSIDE www.smartproinstrument.com

Composition 1. Probe pen 2. Metal handle 3. Retractable probe tip 4. Probe protective cap 5. Adaptor inlet 6. Probe pen socket 7. Battery compartment 8. Diamond test disc 9. ON/OFF switch 10. Simulant test disc 11. Analog panel display 12. Low battery indicator red LED 13. Simulant indicator green LEDs 14. Diamond Indicator blue LEDs

III. IMPORTANT NOTICE a. Keep the tester dry. Precipitation and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your tester does get wet, remove the batteries, and allow the tester to dry completely before replacing it. b. Do not use, store or expose the tester in dusty and dirty areas. It’s moving part and electronic components can be damage. c. Do not use, store or expose the tester in hot areas. High temperatures can damage or shorten the life of the tester, damage batteries, and warp or melt certain plastics. d. Do not use, store or expose...

f. Do not drop, knock, or shake the tester. Rough handling can break internal circuit boards and fine mechanics. g. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the tester. h. Do not paint the tester. Paint can clog the moving parts and prevent proper operation. If the tester is not working properly, kindly contact our customer service at customercare@smartproinstrument.com SmartPro Instrument co.,ltd. 249/40, Moo 9, J.S.P. Building Bangbon 1 Rd., Bangbon Bangkok 10150 Thailand +66 (0) 2 899 2956-7 Attn: Customer Service Executive 11

1. GETTING STARTED Powering up This tester can be powered by either the use of batteries or through the use of an AC adaptor. Batteries are required AAA x 3 batteries, take note of the positive (+) and negative (-) directions of batteries (Fig 1.1). The use of alkaline batteries is preferred, as it should generally give approximately 2 and half hours of continuous operation. AC adaptor is used, connect one end to the tester Adaptor inlet and the other end directly into an electrical outlet (Fig 1.2). Please ensure that only the adaptor supplied by SmartPro is used.

TE,SPINEL JADEI ,AMETHYST RUB INE Y,S ITR AP TOPAZ GL ,C PH TZ IR AR E QU QU E,A IT MERALD CA AN E,E NZ L AS TA PR SO DIAM OND Made in @ Thailand Smartpro instrument co.,ltd No . 0010102003034044 249/40, MOO 9, J.S.P. BUILDING, BANGBON 1 ROAD, BANGBON , BANGBON, BANGKOK 10150, THAILAND. TEL: +66 (0) 2 899 2956-7 FAX: +66 (0) 2 899 2955 Email : Sales@smartproinstrument.com , Customercare@smartproinstrument.com

Turning on Insert the probe pen into the socket at side of the tester (Fig 1.3). Note that the probe pen must be inserted into the socket before turning on the tester. DIAMOND TE,SPINEL JADEI ,AMETHYST RUB S INE Y,S AS ITR AP TOPAZ GL ,C PH TZ IR AR E QU QU E,A IT MERALD CA AN E,E NZ L AS TA PR SO

When pushing the button switch there will be the initial warm-up period. It will show the status by the lighting of the LEDs. The button switch will light green color then the GREEN LEDs above the panel will light and running continuously until reach the 2 of BLUE LEDs will blinking with sound 2 times. At this point, the needle position slightly at zero scale. So, It’s means your tester is ready now for use (Fig 1.4). DIAMOND ITE,SPINEL JADE ETHYST RUBY E,AM ,SA S RIN PP AS TOPAZ IT HI ,C GL RE TZ AR UA QU ,AQ TE CA NI MERALD L E,E ZA AS AN PR SO

Testing to ensure your SmartPro Gem-Eye I is functioning property Simulant test disc Press the probe tip onto the simulant test disc (Fig.1.5). Apply sufficient pressure to retract the protruding tip completely into the probe pen. The indicator should rise to and remain within the center of red strip with “CAL” printed on top within 3 seconds.

Diamond test disc Press the probe tip onto the diamond test disc (Fig.1.6). Apply sufficient pressure to retract the protruding tip completely into the probe pen. Once this has been completed, the needle should rise and reach its highest point well within the blue band of the panel display, also the 7 GREEN LEDs will light stable then all the BLUE LED 2 times blinking with sound.