Stepper motors with integrated driver SMD-2.8mini SMD-2.8mini is step motor driver, which is are designed to be buit-in into stepper motors. We offer these drivers together with stepper motors SM5776 as whole assembled units. No need of connecting, adjusting or any other preparation – the system is a ready to work complete step motor drive. The control mode is a standard pulse position control by voltage STEP/DIR signals. As SMD-2.8mini drivers has quite little dimensions, these complete drives save space in a final product. As these drives are supplied as whole units, no need of connection and adjusting driver and step motor and save personnel's time. Control mode is standard Pulse/Dir mode – step motor driver receives voltage pulses as Step signal and voltage level as Direction signal. Motion displacement depends on pulses number, motion speed is proportional to pulses frequency. The direction depends on voltage level on DIR input. The main parameters: · Maximum holding torque: 18.9 kgf*cm Maximum current per phase: 2.8 A Motor rotor inertia: 480 g*cm2 Dimensions of stepper motor SM5776 with built-in driver SMD-2.8mini: Tallinn Science Park Tehnopol, Mäealuse st. 4, Tallinn 12618, Estonia Phone: + 372 6559914, e-mail: [email protected] url: http:/