1. Catalogs
  2. Smart Antenna Technologies Ltd.
  3. LTE 4G Bands Flexible PCB Antenna SPECIFICATION

LTE 4G Bands Flexible PCB Antenna SPECIFICATION
1 /11Pages

LTE 4G Bands Flexible PCB Antenna SPECIFICATION

LTE 4G Bands Flexible PCB Antenna SPECIFICATION
1 /11Pages

Catalog excerpts

LTE 4G Bands Flexible PCB Antenna SPECIFICATION-1

Flexible PCB Antenna Series P/N: FPC-00LAI0A LTE 4G Bands Flexible PCB Antenna SPECIFICATION Antenna Features Electrical Dim: 100.4mm*16.5mm*0.15mm -50°C~85°C Thermal Resistance RoHS, REACH Compliant Double Sided Adhesive Navigation System Supporting Direct Stick on Device Enclosure Drone Vehicle Navigation System IoT Devices Navigation

 Open the catalog to page 1
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-2

Flexible PCB Antenna Series P/N: FPC-00LAI0A

 Open the catalog to page 2
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-3

Flexible PCB Antenna Series P/N: FPC-00LAI0A 1. Introduction NVC provides high quality ceramic patch antenna series for navigation system application. The ceramica patch antennas are easily installed into customer devices, through pin or SMT direct feed to exciting antenna to go high level and accurate satellites signals. Assist end user can get location located. Such application, for example, drone/UAV application, the device needs accurancy location information in order to execute auto-pilot or return back to the point of departture. All these application, the device needs good satellites signals....

 Open the catalog to page 3
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-4

Flexible PCB Antenna Series P/N: FPC-00LAI0A Operation Temperature Storage Temperature *The antenna was tested on 2mm thick ABS board.

 Open the catalog to page 4
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-5

Flexible PCB Antenna Series NOVOCOMMS P/N: FPC-00LAI0A 3.1.1. Return Loss 3.1.2. Efficiency

 Open the catalog to page 5
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-6

Flexible PCB Antenna Series P/N: FPC-00LAI0A 3.1.4. Antenna Measurement Setup & 3D Patterns Z *Testing set in NVC GTS2800 compatible Anechoic Chamber 700MHZ

 Open the catalog to page 6
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-7

Flexible PCB Antenna Series P/N: FPC-00LAI0A

 Open the catalog to page 7
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-8

Flexible PCB Antenna Series P/N: FPC-00LAI0A

 Open the catalog to page 8
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-9

Flexible PCB Antenna Series P/N: FPC-00LAI0A 10 pieces per PE Bag 200 pieces per Bubble Bag 2000 pieces per Outer Carton

 Open the catalog to page 9
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-10

Flexible PCB Antenna Series

 Open the catalog to page 10
LTE 4G Bands Flexible PCB Antenna SPECIFICATION-11

Flexible PCB Antenna Series P/N: FPC-00LAI0A 6. Application Note The antenna can be easily stick on the inner side of the device enclosure, please be aware any metal content part might affect antenna radiation performance. Please keep the metal content part as far as possible to antenna. If your evaluation cannot avoid the metal content part approximate to antenna body. Please contact your local supporting NVC sales, we will provide the best simulation in your application. Also, get the antenna fine tuned with the best performance delivery.

 Open the catalog to page 11

All Smart Antenna Technologies Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.