SSR Series

Product catalog summary

Overview: This document provides detailed specifications for the SSR Series Standard Section Springs manufactured by Smalley. The springs are available in both carbon steel and 17-7 PH stainless steel, with dimensions primarily in inches unless otherwise specified.

Specifications:

Dimensions: The document lists dimensions for springs ranging from SSR-0050 to SSR-1600, detailing the bore diameter, shaft clearance, load at work height, free height, thickness, radial wall, and spring rate.
Material Options: Springs are available in carbon steel and 17-7 PH stainless steel, with the option to add a suffix "-S17" for stainless steel variants.
Wave Types: The springs are categorized into 3-wave overlap type and 4-wave and up gap type.

Key Parameters:

Load and Height: The load at work height and free height are specified for each spring, indicating the operational and relaxed states.
Thickness and Wall Rate: These parameters are crucial for determining the spring's performance and are provided for each model.

Ordering Information: Reference is made to pages 134-135 for detailed ordering instructions, ensuring customers can accurately specify their requirements.

Summary of Data Tables: The document includes extensive tables listing each spring's specifications, allowing for easy comparison and selection based on specific needs.

Catalog excerpts

Standard Section Springs Stock Items in carbon steel and 17-7 PH stainless steel. Springs listed below are 3 wave, Overlap Type. Smalley Part Number 1, 4 SSR-0050 SSR-0062 SSR-0075 SSR-0087 SSR-0100 SSR-0112 SSR-0125 SSR-0137 SSR-0150 SSR-0162 Work Height Radial Wall Add sux “-S17” for 17-7 stainless steel. Reference dimension. 3 Theoretical dimension; measured in lb/in. 4 See pages 134-135 for How to Order. 2 OVERLAP TYPE SSR-0050 to SSR-0162 Product Dimensions All dimensions in inches unless otherwise specified. RADIAL WALL Bayonet Connector FREE HEIGHT CLEARS SHAFT DIAMETER LOAD AT WORK HEIGHT OPERATES IN BORE DIAMETER

Open the catalog to page 1

Operates in Bore Diameter Clears Shaft Diameter Work Height Radial Wall GAP TYPE SSR-0175 to SSR-1600 Product Dimensions All dimensions in inches unless otherwise specified. RADIAL WALL FREE HEIGHT CLEARS SHAFT DIAMETER LOAD AT WORK HEIGHT OPERATES IN BORE DIAMETER Add sux “-S17” for 17-7 stainless steel. Reference dimension. 3 Theoretical dimension; measured in lb/in. 4 See pages 134-135 for How to Order. 2

Open the catalog to page 2

SSR Series

SSR Series

Catalog excerpts

All Smalley catalogs and technical brochures

Archived catalogs