*mydirectindustry

Catalogs
SLOAN
LED Module

LED Module

Product catalog summary

Overview: The document outlines technical specifications for Flexiprint and LED modules, focusing on their electrical and optical characteristics, dimensions, and compliance standards. It also discusses IP protection levels and their implications.

General Specifications:

Dimensions are in millimeters with a length tolerance of ±1%.
Stranded wires have a cross-section of 0.2mm² (AWG #24).
Specifications may change without notice.

Flexiprint IP20 Specifications:

Voltage: 24V, Current: 2.7A, Wattage: 26W/m.
315 LEDs per 2.5m stripe, 120° viewing angle.
Operating temperature: -15 to +40°C, Storage: -25 to +60°C.
CE/RoHS compliant, adhesive tape on backside, cuttable every ~56mm.

Flexiprint Silicone IP64 Specifications:

Voltage: 12V, Current: 2A, Wattage: 4.8W/m.
300 LEDs per 5m stripe, 120° viewing angle.
Operating temperature: -15 to +40°C, Storage: -25 to +60°C.
CE/RoHS compliant, adhesive tape on backside.
IP64 protection: Splash proof, not resistant to UV, saltwater, smog, or chlorine.

Flexiprint Silicone IP67 Specifications:

Voltage: 12V, Current: 2A, Wattage: 4.8W/m.
300 LEDs per 5m stripe, 120° viewing angle.
Operating temperature: -15 to +40°C, Storage: -25 to +60°C.
CE/RoHS compliant, adhesive tape on backside.
IP67 protection: Waterproof for temporary immersion, not resistant to UV, saltwater, smog, or chlorine.

Electrical and Optical Characteristics:

Part numbers include color, wavelength, intensity (lm/m), and energy efficiency class (EEC).
Light output reduction for IP64 and IP67 due to silicone filtering.

Additional Features:

Quick connector available for solderless connection with LED stripes.

General Information for Flexiprint and LED Modules:

Use rated input voltage of DC12V ±5% or DC24V ±5%.
Operate in 30-80% humidity and specified temperature range.
For indoor use only; avoid high humidity or direct sunlight.
IP64, IP67, and IP68 lose waterproof protection after cutting.
Not suitable for acid/alkali or UV exposure.

Colour and Brightness Offset:

Silicone cover affects color and brightness of IP64, IP67, and IP68.
Color tends to be colder with a stronger blue spectrum.
Brightness reduction: ~10% for IP64, ~15% for IP67 and IP68.

Installation Guidelines:

Installation by qualified electrician required.
Ensure ESD safety, cut only at designated markings.
Avoid excessive bending; adhere to specified radii.
Install on clean, heat-dissipative surfaces; avoid flammable materials.
Choose appropriate power supply; avoid overloading.
Connect strips in parallel to prevent voltage drop and overheating.
Do not touch powered LED products; verify installations before powering on.

Major Application Fields:

Automotive, Consumer Electronics, Industrial and Traffic Controls, Telecommunication, Defence, Aviation, Security, and Medical sectors.

Company Information:

SIBALCO AG, Birmannsgasse 8, CH-4055 Basel, Switzerland. Tel: +41 (0)61 264 10 10, Fax: +41 (0)61 264 10 15, Email: [email protected], Website: www.sloan.ch

Catalog excerpts

slOan PRECISION OPTOELECTRONICS

Open the catalog to page 1

Additional Sloan Product Catalogues Zusätzliche Sloan Produktkataloge Catalogues additionnels des produits Sloan Request your desired Sloan product catalogue Fordern Sie Ihre gewünschten Sloan-Produktkataloge an Demandez les catalogues de produits Sloan de votre choix

Open the catalog to page 2

SLOGAN Directory / Inhaltsverzeichnis / Annuaire de contenu Product Flexipr Colour single colour single colour dual white single colour single colour single colour single colour single colour single colour single colour single colour single colour RGB RGB Cable & Connectors Wiring Instructions General Information for Flexiprint, LED strips and LED Modules

Open the catalog to page 3

3528 PLCC2, single colour, standard bright, extra slim stripe Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~49.6mm Electrical and optical characteristics (Ta=25°C) Part number Part number 1. All dimensions are in millimetres 2. Length tolerance ±1% 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Please also take note of our General Information for Flexiprint and LED Modules

Open the catalog to page 4

3528 PLCC2, single colour, standard bright Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~50mm Electrical and optical characteristics (Ta=25°C) Part number Part number 1. All dimensions are in millimetres 2. Length tolerance ±1% 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Quick connector for a solderless connection with the LED stripe. Part-no.: SLO-C310-00001 (details on page...

Open the catalog to page 5

Flexiprint IP20 3528 PLCC2, single colour, standard bright Min. bending radius (edges/corners) 30mm CE/RoHS compliant Benefits Adhesive tape on backside Cuttable every ~100mm Electrical and optical characteristics (Ta=25°C) Part number FP1-B01D-500 Colour Q blue O green red Colour Q warm-white Q warm-white Q natural-white Q cold-white Quick connector for a solderless connection with the LED stripe. 1. All dimensions are in millimetres (details on page 36) 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Please also take note of our General...

Open the catalog to page 6

3528 PLCC2, dual-white, standard bright Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~100mm Electrical and optical characteristics (Ta=25°C) Part number FP1-NW02D-500 1. All dimensions are in millimetres 2. Length tolerance ±1% 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Please also take note of our General Information for Flexiprint and LED Modules

Open the catalog to page 7

Flexiprint IP20 3528 PLCC2, single colour, standard bright, double density FP-x02B-250 Specifications Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~25mm Electrical and optical characteristics (Ta=25°C) Part number FP-B02B-250 Colour Q blue O green Colour O warm-white Q warm-white Q natural-white Q cold-white Quick connector for a solderless connection with the LED stripe. Part-no.: SL0-C310-00001 (details on page 36) 3. All strandet...

Open the catalog to page 8

3528 PLCC2, single colour, standard bright, double density Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~50mm Electrical and optical characteristics (Ta=25°C) Part number Part number 1. All dimensions are in millimetres 2. Length tolerance ±1% 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Quick connector for a solderless connection with the LED stripe. Part-no.: SLO-C310-00001...

Open the catalog to page 9

5060 PLCC6, single colour, high bright Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~50mm Electrical and optical characteristics (Ta=25°C) Part number Part number 1. All dimensions are in millimetres 2. Length tolerance ±1% 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Please also take note of our General Information for Flexiprint and LED Modules

Open the catalog to page 10

5060 PLCC6, single colour, high bright Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~100mm Electrical and optical characteristics (Ta=25°C) Part number Part number 1. All dimensions are in millimetres 2. Length tolerance ±1% 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Please also take note of our General Information for Flexiprint and LED Modules

Open the catalog to page 11

3528 PLCC2, single colour, standard bright, high densitiy Voltage Current Wattage Number of LEDs Length of stripe Viewing angle Min. bending radius (edges/corners) Operating temperature Storage temperature CE/RoHS compliant Adhesive tape on backside Cuttable every ~26.3mm Electrical and optical characteristics (Ta=25°C) Part number Thickness: 2 mm +1 1. All dimensions are in millimetres 2. Length tolerance ±1% 3. All strandet wires cross section 0.2mm2 AWG #24 4. Specifications are subject to change without notice Please also take note of our General Information for Flexiprint and LED Modules

Open the catalog to page 12

LED Module

LED Module

Catalog excerpts

All SLOAN catalogs and technical brochures