Metal Detectors «Barrier»
8Pages

Metal Detector Detection tramp metal on belt splice Detection of non-magnetic manganese steel Detection metal by size or length Tramp Metal Detector The metal detector «Barrier» was developed for detection manganese steel in the iron ore flow with iron content up to 70% (and other highly mineralized or magnetic ores), it is the device for detecting tramp metal fragments in the flow of moving material even when conveyed on steel corded belts, operating in a continuous mode. The metal detector is designed to ensure trouble-free operation of crushing equipment at mining and processing industries by automatic detection of metal fragments of both magnetic and non-magnetic metals.

The metal detector stops the conveyor for manual extraction (or con- trols the rectifier station electromagnetic separator for automatic re- moval) when the tramp metal is detected, shows the size and length of the metal detector «Barrier» are the detected metal and its position relative to the conveyor search coil preserved when working on con- on the local digital display and remote graphical display. veyors for transporting iron ore with an iron content of up to Prevents conveyor belt damage due to long rods piercing the belt at transfer points, the Metal Detector «Barrier» in this mode...

Conversion module 2M409F The module 2M409F performs the metal detection function, automatic adjustment when the composition of iron ore changes, sensitivity correction, calculates the size and length of the detected metal and the distance to it from the conveyor sensor. Unlike many other Metal Detectors, in case of several fragments are detected, 2M409F displays their total size, which eliminates metal skipping when searching for it, if there are several tramp metal fragments on one section on the belt, and some of them are under the transported material. The 3B409E module provides...

Remote diagnostics of the metal detector Autocorrection of metal detector settings CAN / Modbus TCP / RTU networking capabilities Visualization and data analysis User access restriction Autocorrection of settings during ore properties change Autocorrection of metal detector settings is performed by the method of operational control of the content of a useful component in the iron ore (or other highly mineralized or magnetic ores) raw material (product), comparison of the obtained data with preset product profiles and automatic profile switching. Fine tuning Real-time access to all...

Remote Diagnostics Remote management via VNC, as well as full access to display and configure all metal detector parameters over Modbus TCP (Ethernet). Data analysis Real-time visualization of metal detector data, with the ability to display by trigger, fix and scale each channel. Sensitivity mode Two sensitive mode can be activated separately or together: along the length and/or over the total size of the foreign metal. Every mode has own relay output signal if they activated together. Control of operator actions It is carried out based on the results of analyzing the data of the event log...

Installation of metal detectors UKRAINE Granite Metal Detectors «Barrier» have been installed at 53 crushed stone production enterprises in Ukraine. Rivne Zhytomyr Kyiv Kharkiv Lviv Ternopil Khmelnytskyi Vinnytsia Kirovohrad Luhansk Donetsk Zaporizhia Mykolaiv Odessa with iron content up to 70%. 137 Metal Detectors Barrier are installed at all iron mining and processing plants and bulk seaports in Ukraine. the entire volume of manufactured in Ukraine is inspected by the Barrier metal detector

Converter slag with iron content Fe 40% and copper Cu - 8% for the production of aluminum, is checked for the absence of tramp metal with «Barrier» North Kazakhstan are inspected by Metal Detectors «Barrier» metal detectors. WestKazakhstan Aktobe AlmatyProvince Kyzylorda Jambyl AlmatyCity South Kazakhstan Metal Detectors «Barrier» are installed on mining processing lines Tashkent Namangan Andijon Guatemala City Racha-Lechkhumi and Kvemo Svaneti Nickel ore metal detectors «Barrier» ensure prevention of tramp metal ingress into crushing equipment. to output coarse-grained gold, it is...

Slavutich Technology is a Ukrainian company with 25 years of experience in development and production of industrial tramp metal detectors for various applications. Since 1997, we have installed more than 700 different types of metal detectors on iron ore, copper, gold processing and concentrating plants, dry bulk seaports, and aggregates factories. The first model of the metal detector «Barrier» was developed in September 1997 for the mining and metallurgical industry, where for the first time digital signal processing, automatic adjustment and the ability to detect tramp iron & manganese...