Catalogs >
Skynet Electronic >
SNP-Z30 series

SNP-Z30 series
4Pages

Catalog excerpts

General Purpose Features: With built-in PFC Only 1.6 inch height 4.2 Watt per cubic inch With ITE safety only Efficiency between 80% to 90% Operation from 0oC to 70oC by convection Dimensions shown in mm as left. Tolerance: +/-1mm (Excluding cables). Size: 127.8 X 228.6 X 40.6 (mm) 5 X 9 X 1.6 (inch) Packing: Net weight: 1000 g approx. / unit Gross weight: 14 kg approx. / carton, 12 units / carton Carton size (mm): 485 (L) x 291 (W) x 360 (H) Connectors: AC input: Terminal blocks DC output: Terminal blocks Remote Sense : Molex 5045-02A or equivalent AUG. 2012 ** This data sheet is only for models selection. For business, engineering specification by model must be used.

Open the catalog to page 1

General Purpose Output Specifications: MODEL Note: 1. Each output can provide up to max load separately. Continuous staying in more than total output power is not allowed in free air convection. The max. load must be with 18 CFM fan cooling. 2. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load. 5. Ripple & noise is...

Open the catalog to page 2

General Purpose Performance for SNP-Z309 (input voltage is 115VAC, unless others specified): 1. Switching frequency ripple 2. Line frequency ripple 3. Output turn on wave form 4. Output turn off wave form 6. Over voltage protection Trip point around 28.2V AUG. 2012 ** This data sheet is only for models selection. For business, engineering specification by model must be used.

Open the catalog to page 3