*mydirectindustry

SNP-Z10 series

1 / 4 PagesView full catalog

SNP-Z10 series

Product catalog summary

Mechanical Specifications:

Dimensions vary slightly between models, with most being 127.0 x 76.2 x 30 mm or 32 mm.
Net weight is approximately 310 g per unit, with a carton weight of 17 kg for 48 units.
Connectors include Molex types for AC input, DC output, remote sense, and fan output.

Environmental and Safety Standards:

Operating temperature ranges from 0°C to 50°C with convection cooling, and storage temperature ranges from -20°C to +85°C.
Complies with EMI standards EN55022 "B" and FCC "B", harmonics EN61000-3-2, and EMS standards EN61000-4 series.
Safety certifications include UL 60950-1, CSA C22.2 No. 60950-1, and TUV EN 60950-1.

Electrical Specifications:

Input voltage ranges from 90 VAC to 264 VAC with a frequency of 47 Hz to 63 Hz.
Inrush current is less than 30A at 115VAC and less than 60A at 230VAC.
Efficiency ranges from 80% to 90% depending on the model.
Protection features include auto recovery for overload and short circuit, and latch off for over voltage.

Output Specifications:

Models provide various output voltages and currents, such as SNP-Z106 with +5V at 20A, and SNP-Z107 with +12V at 9A.
Ripple and noise are measured with specific capacitors and oscilloscope settings.
Line and load regulation are defined by specific changes in input voltage and output load.

Performance and Testing:

Hold-up time, over voltage protection, and output waveforms are specified for SNP-Z106.
Power derating curve and thermal profile are provided for performance analysis.

Catalog excerpts

General Purpose Only 1.26 inch height 4.8 Watt per cubic inch Operation from 0oC to 50oC by convection Mechanical Specifications: 1. Dimensions shown in mm as left. Tolerance: +/-0.4mm. 2. Size: 2.1 SNP-Z106, Z107, Z108, Z109, Z10T, Z10B 127.0 X 76.2 X 30 (mm) 5" X 3" X 1.18" 2.2 SNP-Z101, Z103, Z10D 127.0 X 76.2 X 32 (mm) 5" X 3" X 1.26" 3. Packing: Net weight: 310 g approx. / unit Gross weight: 17 kg approx. / carton, 48 units / carton Carton size (mm): 397 (L) x 339 (W) x 327 (H) 4. Connectors: AC input : Molex 5277-02A or equivalent DC output : Molex 5273 or equivalent Remote Sense : Molex 5045-02A or equivalent (for SNP-Z10X, X=6, 7, 8, 9, B, T) Fan Output : Molex 5045-02A or equivalent (for SNP-Z10, SNP-Z10D) -Steven- AUG. 2012 ** This data sheet is only for models selection. For business, engineering specification by model must be used.

Open the catalog to page 1

General Purpose Output Specifications: The total output current is rated load with free air convection and max. load with 18CFM of forced air flow over the unit. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load 5. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor...

Open the catalog to page 2

General Purpose 1. Switching frequency ripple AUG. 2012 ** This data sheet is only for models selection. For business, engineering specification by model must be used.

Open the catalog to page 3

General Purpose Test condition: 12. Power derating curve Rated load Operating Temperature This data sheet is only for models selection. For business, engineering specification by model must be used. AUG. 2012

Open the catalog to page 4

SNP-Z10 series

SNP-Z10 series

Catalog excerpts

All Skynet Electronic catalogs and technical brochures

Archived catalogs