SNP-Y11 Series
SNP-Y11 Series
Product catalog summary
General Specifications:- Input Voltage: 90VAC to 264VAC
- Input Frequency: 47Hz to 63Hz
- Inrush Current: <30A at 115VAC, <60A at 230VAC
- Efficiency: 78% to 87% depending on model
- Hold Up Time: 20ms typical at rated load and 115VAC
- Earth Leakage Current: <300uA
- Protection: Overload and short circuit with auto recovery, over voltage with latch off
- Operating Temperature: 0 to 70°C with derating above 50°C
- Cooling: Free air convection
- Storage Temperature: -40°C to +85°C
- EMI Compliance: FCC "B", EN55022 "B", EN55011 "B"
- EMS Compliance: EN61000-4-2,-3,-4,-5,-6,-8,-11
- Harmonics: EN61000-3-2 class "A"
- Safety Standards: UL 60950-1, UL 60601-1, CSA C22.2 No. 60950-1, 601.1, EN 60950-1, EN 60601-1
Mechanical Specifications:- Dimensions: 88.9 x 152.4 x 36.1 mm (3.5" x 6" x 1.42")
- Net Weight: 360g per unit
- Gross Weight: 74kg per carton (32 units per carton)
- Carton Size: 477 x 290 x 379 mm
- Connectors: Various Molex connectors for AC input, DC output, LED, and fan
Output Specifications:- Peak Load Duration: 8 seconds without shutdown
- Combinational Load for SNP-Y06D: Maximum 38W for +3.3V & +5V
- Line Regulation: ±10% input voltage change at rated load
- Load Regulation: ±40% output load change from 60% rated load
- Ripple & Noise: Measured with 15MHz bandwidth limited oscilloscope
- Efficiency: Measured at nominal line and rated load
Features:- Height: 1.36 inches
- Power Density: 3.8 Watt per cubic inch
- Safety: ITE & Medical safety compliant
- Single Side PCB: For low assembly cost
Performance Characteristics:- Switching Frequency Ripple
- Line Frequency Ripple
- Output Turn On/Off Waveform
- Step Response for +5V and +12V
- Compliance with FCC B and EN 55011 B standards
See more
All Skynet Electronic catalogs and technical brochures
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.