Rated 60W Peak 90W SNP-Y06 Series General Purpose Only 1.18 inch height 4.2 Watt per cubic inch With ITE & Medical safety Operation from 0oC to 70oC by convection Single side PCB for low assembly cost Mechanical Specifications: o3.5TYP. MOUNTING HOLES x4 Dimensions shown in mm as left. Tolerance: + -1mm (Excluding cables). Size: 63.5 X 114.3 X 30 (mm) 2.5" X 4.5" X 1.18" Packing Net weight: 155 g approx. / unit Gross weight: 15 kg approx. / carton, 80units / carton Carton size (mm): 442 (L) x 370 (W) x 301 (H) Connectors TB1-AC input : JST B3P-VH withdraw one pin or equivalent TB2-DC output : JST B4P-VH or equivalent for single output JST B6P-VH or equivalent for multiple outputs Output Pin assignment PIN NO. SNP-Y061 SNP-Y066 SNP-Y067 SNP-Y067-1 SNP-Y068 SNP-Y068-1 SNP-Y069 SNP-Y06T SNP-Y06F ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Rated 60W Peak 90W SNP-Y06 Series General Purpose Output Specifications: 1. At peak load, the output can last for 8 seconds without shut down. 2. The maximum combinational load of SNP-Y06D for +3.3V & +5V is 38W. 3. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is setting to within the specified accuracy range at rated load. 4. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 5. Load regulation is defined by changing ±40% of measured output load from 60% rated load...

General Purpose Rated 60W Peak 90W SNP-Y06 Series Performance for SNP-Y061: 2. Line frequency ripple 1. Switching frequency ripple 4. Output turn off wave form 3. Output turn on wave form 6. Over voltage protection Trip point around 6.4V ** This data sheet is only for model selection. For business, engineering specification by model must be used.

General Purpose other output at 60% rated load other output at 60% rated load 11. Power derating curve Rated load Operating Temperature This data sheet is only for model selection. For business, engineering specification by model must be used.