Catalogs >
Skynet Electronic >
SNP-G16 series

SNP-G16 series
4Pages

Catalog excerpts

General Purpose Rated 160W SNP-G16 Series ITE & Medical Safety With built-in active PFC With ITE & Medical (-M) safety Operation from -20oC to 70oC by convection Optional U-shape case (-U) / Metal box (-C) / Built-in Fan (SNP-E30) Mechanical Specifications: Dimensions shown in mm as left. Tolerance: ±0.4mm. Size: 76.2 x 127 x 36.1 (mm) 3" x 5" x 1.42" Packing: Net weight: 353 g approx. / unit Gross weight: 15 kg approx. / carton, 16 units / carton Carton size (mm): 384 (L) x 339 (W) x 327 (H) Connectors: AC input: Molex 5277-02A or equivalent DC output: Terminal blocks or Molex 5273-08A (equivalent) Fan, Remote sense: Molex 5045-02A or equivalent ** This data sheet is only for models selection. For business, engineering specification by model must be used.

Open the catalog to page 1

General Purpose Rated 160W SNP-G16 Series ITE & Medical Safety Output Specifications: OUTPUT LOAD RIPPLE NOISE 1. Each output can provide up to max load separately when the power supply starts up. To exceed the max. output power continuously is not allowed. 2. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load. 5. Ripple &...

Open the catalog to page 2

General Purpose Rated 160W SNP-G16 Series ITE & Medical Safety Performance for SNP-G167: 1. Switching frequency ripple 2. Line frequency ripple 3. Output turn on wave form 4. Output turn off wave form +12V/13.3A 6. Over voltage protection Trip point around 14.1V (60% Rated load) ** This data sheet is only for models selection. For business, engineering specification by model must be used.

Open the catalog to page 3

General Purpose 11. Power derating curve Rated load : This data sheet is only for models selection. For business, engineering specification by model must be used. FEB. 2013

Open the catalog to page 4