SNP-CK66
4Pages

Catalog excerpts

General Purpose Only 1.24 inch height 6.0 Watt per cubic inch Operating from 0oC to 70oC by convection Mechanical Specifications: Dimensions shown in mm as left. Tolerance: + -1mm (Excluding cables). Size: 101.6 X 50.8 X 31.6 (mm) 4" X 2" X 1.24" Packing: Net weight: 136.4 g approx. / unit Gross weight: 13.5 kg approx. / carton, 80 units / carton Carton size (mm): 382 (L) x 374 (W) x 277 (H) Connectors: AC input : JST B2P3-VH or equivalent DC output : JST B6P-VH or equivalent for single output Output Pin assignment: PIN NO. ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 1

General Purpose Output Specifications: MODEL Note: 1. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is setting to within the specified accuracy range at rated load. 2. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 3. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load. 4. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF...

Open the catalog to page 2

General Purpose Performance for SNP-CK6T: 2. Line frequency ripple 1. Switching frequency ripple 3. Output turn on wave form 4. Output turn off wave form 6. Over voltage protection Trip point around 57.6V ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 3

General Purpose 10. Power derating curve Rated load Operating Temperature ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 4