Catalogs >
Skynet Electronic >
SNP-C15 series

SNP-C15 series
4Pages

Catalog excerpts

Rated 150W Peak 225W SNP-C15 Series General Purpose Features: Built-in active PFC With ITE safety Only 1.5 inch height With power on LED With output adjustable trimmer Efficiency between 82% to 87% Operation from -20oC to 70oC by convection Screw protrusion customer system Mounting screw Chassis Dimensions shown in mm as left. Tolerance: ±0.4mm. Size: 95 X 199 X 38 (mm) 3.74" X 7.83" X 1.5" Packing: Net weight: 770 g approx. / unit Gross weight: 18.8 kg approx. / carton, 20 units / carton Carton size (mm): 519 (L) x 326 (W) x 275 (H) Connectors AC input & DC output : Terminal Blocks, 8.25mm interval Output Pin assignment: PIN NO. Bottom view Earth Earth ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 1

Rated 150W Peak 225W SNP-C15 Series General Purpose Output Specifications: OUTPUT RAIL Note: 1. The max. load can be continuously provided at 50oC and convection cooling conditions. The peak load can be temporarily provided up to 8 seconds. 2. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is setting to within the specified accuracy range at rated load. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured...

Open the catalog to page 2

General Purpose Rated 150W Peak 225W SNP-C15 Series Performance for SNP-C15A: 1. Switching frequency ripple 2. Line frequency ripple 3. Output turn on wave form 4. Output turn off wave form 6. Over voltage protection Trip point around 6.20V ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 3

General Purpose other output at 60% load other output at 60% load 11. Power derating curve Rated load Operating Temperature This data sheet is only for model selection. For business, engineering specification by model must be used. AUG. 2012

Open the catalog to page 4