Catalogs >
Skynet Electronic >
SNP-C10 series

SNP-C10 series
4Pages

Catalog excerpts

Rated 100W Peak 150W SNP-C10 Series General Purpose Features: Built-in active PFC With ITE safety Only 1.42 inch height With power on LED With output adjustable trimmer Efficiency between 80% to 87% Operation from -20oC to 70oC by convection Screw protrusion customer system Mounting screw Dimensions shown in mm as left. Tolerance: ±0.4mm. Size: 95 X 159 X 36 (mm) 3.74" X 6.25" X 1.42" Packing: Net weight: 610 g approx. / unit Gross weight: 14.6 kg approx. / carton, 20 units / carton Carton size (mm): 430 (L) x 306 (W) x 251 (H) Connectors AC input & DC output : Terminal Blocks, 8.25mm interval Output Pin assignment: Earth Earth ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 1

Rated 100W Peak 150W SNP-C10 Series General Purpose Output Specifications: OUTPUT RAIL Note: 1. The max. load can be continuously provided at 50oC and convection cooling conditions. The peak load can be temporarily provided up to 8 seconds. 2. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is setting to within the specified accuracy range at rated load. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured...

Open the catalog to page 2

General Purpose Rated 100W Peak 150W SNP-C10 Series Performance for SNP-C100: 1. Switching frequency ripple 2. Line frequency ripple 4. Output turn off wave form 3. Output turn on wave form 6. Over voltage protection Trip point around 6.34V +5V +5V step from 20% load to 100% load other outputs at 60% load ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 3

General Purpose 9. Power derating curve Rated load Operating Temperature This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 4