Catalogs >
Skynet Electronic >
SNP-C06 series

SNP-C06 series
4Pages

Catalog excerpts

Rated 60W Peak 90W SNP-C06 Series General Purpose Features: With ITE safety Only 1.42 inch height With power on LED With output adjustable trimmer Efficiency between 77% to 86% Operation from -20oC to 70oC by convection Screw protrusion limitation Customer system Chassis Mounting screw Bottom view 24.5 Dimensions shown in mm as left. Tolerance: ±0.4mm. Size: 95 X 100 X 36 (mm) 3.74" X 3.93" X 1.42" Packing: Net weight: 390 g approx. / unit Gross weight: 14.2 kg approx. / carton, 30 units / carton Carton size (mm): 403 (L) x 313 (W) x 278 (H) Connectors AC input & DC output : Terminal Blocks, 8.25 mm interval Output Pin assignment: PIN NO. SNP-C06B Earth Earth Earth Earth Earth Earth ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 1

Rated 60W Peak 90W SNP-C06 Series General Purpose Output Specifications: OUTPUT RAIL Note: 1. The max. load can be continuously provided at 50oC and convection cooling conditions. The peak load can be temporarily provided up to 8 seconds. 2. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is setting to within the specified accuracy range at rated load. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured...

Open the catalog to page 2

General Purpose Rated 60W Peak 90W SNP-C06 Series Performance for SNP-C060: 1. Switching frequency ripple 2. Line frequency ripple 4. Output turn off wave form 3. Output turn on wave form 6. Over voltage protection Trip point around 6.2V ** This data sheet is only for model selection. For business, engineering specification by model must be used.

Open the catalog to page 3

General Purpose 11. Power derating curve Rated load Operating Temperature ** This data sheet is only for model selection. For business, engineering specification by model must be used. AUG. 2012

Open the catalog to page 4