The COl is a SLAM LiDAR purpose-built for high-precision localization, mapping, measurement, and obstacle avoidance. Combining three-axis longitudinal non-repetitive scanning and a high-performance IMU, it uses a smaller laser spot and rigorous calibration to produce dense, low-noise point clouds at the hardware level. Without relying on algorithmic compensation, the COl delivers richer detail detection, faster micro-obstacle response, and more stable long-distance mapping. Min. Detection Range 0.05 m Max. Detection Range 40 m ((5) 10% reflectivity); Point Rate 216,000 pts/s (dual-line) Angular...

FIELD TEST PERFORMANCEHardware-level native precision, proven in detail capture and geometry definition. Test 3: Long-Range Mapping Stability No loop closure applied. Lower positional and attitude error keeps drift contained over extended routes.

Laser Wavelength Laser Safety Point Rate Range Precision (la) Angular Resolution Scan Rate Scan Pattern Communication Protocol Motion Sensing IMU Sample Rate Operating Temperature Storage Temperature Ingress Protection Ambient Light Resistance Power Input Voltage 0.3° (h) x 0.36° (v) @ 1 s integration 0.15° (h) x 0.36° (v) @ 2 s integration 10 Hz (typical), up to 30 Hz Non-repetitive UDP (l) Tested in an environment at a temperature of 25° C (77° F) with a target object that has a reflectivity of 80% and is 10 meters away from C01. Official Website: skylandx.com E-mail: [email protected]

Official Website: skylandx.com E-mail: info(a)skylandx.com Linkedln YouTube