Stationary Inline Inductor

Product catalog summary

Technical Specifications:
The document provides technical data for the MI series inline inductors, specifically models MI-25, MI-25/40, MI-40, MI-50, and MI-65. These inductors are designed to inject foam liquid into a water stream, handling high back pressures to extend the distance from the injection point to the foam applicator. The water capacity at 16 bar ranges from 400 l/min for MI-25 to 1450 l/min for MI-65, with a maximum working pressure of 16 bar and a proportioning rate of up to 6%. The pressure drop is approximately 35% of the inlet pressure.

Performance Data:
The MI-25 and MI-25/40 models have specific connection types for water and foam, with the body made of brass and flanges of galvanized steel. The MI-40, MI-50, and MI-65 models also feature brass bodies and galvanized steel flanges, with varying dimensions and weights.

Product Features:
The inline inductors are corrosion-resistant, factory-calibrated for specific flow and pressure ranges, and include an integrated suction check valve. They support foam induction up to 6% and can be installed horizontally or vertically. Optional components include foam inlet ball valves, bronze flanges, and foam concentrate suction hoses.

Installation and Order Information:
Installation requires fitting to DIN PN16 or ANSI 150lbs standards, with optional screw-threaded BSP connections. When ordering, specify the size of the inductor, flange type, water and foam capacity, inlet pressure, type of foam concentrate, and mixing rate.

Listings and Approvals:
The product is approved by Det Norske Veritas (DNV), Russian Maritime Register of Shipping, ISCIR, and the American Bureau of Shipping (ABS).

Catalog excerpts

Datasheet 1004/30 > Page 1 of 2 (replaces datasheets 1004/17-18) General description The function of the stationary inline inductor is toinject foam liquid into a water stream. The inductor is designed to handle high back pressures, extending the distance from injection point to foam applicator. Application description An inline inductor is used in fixed installations, toinject low/medium and high expansion foam concentrates into water flow lines, for deluge and fire monitor installations. Product features MI-25 / 40 > Corrosion resistant with brass body construction > ~225 Factory calibrated to any flow and pressure within the range > DIN 40 or 1 1 / 2 " ANSI Integrated suction check valve MI series ranges from 100 l/min at 5.0 bar to 1450 l/min at 16 bar inlet pressure > Water Solution Installation in horizontal or vertical plane > ~100 Hot-dipped galvanized steel flanges > Installation > 1 ~60 / 2 " BSP Water inlet/outlet: to fit DIN PN16 or ANSI 150lbs or screw threaded BSP > Foam conc. Foam inlet check valve: screw threaded BSP female Optional components > Foam inlet ball valve: screw threaded BSP female > Optional bronze flanges > Foam concentrate suction hose > Russian Maritime Register of Shipping Inductors available in alternative materials - please enquire for further details > ISCIR American Bureau of Shipping (ABS) > Technical Data MI-25MI-25/40 Connection: WaterMale 1" BSP40 DIN PN 16 or 1 1 / 2 " ANSI 150 lbsConnection: FoamFemale 1 1 Performance Data / 2 " BSPFemale / 2 " BSPWeight2.6 kgs / 5.75 lbs7 kg / 15.5 lbs MaterialBodyBrassBrassFlangeGalvanized steelIncludedFoam conc. check valveFoam conc. check valve OptionalFoam conc.suction hoseFoam conc.suction hose MI-25 and MI-25/40 Water capacity at 16 barMax. 400 l/minWorking pressureMax. 16 bar ProportioningMax. 6% Pressure dropApprox. 35% of inlet pressure 1 bar =0,1 MPa = 14,5 psi www.skum.com > Technical changes reserved without noticeCopyright 2007 Tyco Safety Products Datasheet Ref. SKM0007 DSA1 size="-3">

Open the catalog to page 1

A Water Solution B C Foam conc. Performance Data MI-40, MI-50 and MI-65 Water capacity at 16 barMax. 1450 l/minWorking pressureMax. 16 bar ProportioningMax. 6% Pressure dropApprox. 35% of inlet pressure > Technical Data MI-40 MI-50MI-65 Connection: WaterFemale 50 DIN PN 16 or65 DIN PN 16 or 1 > 1 / > 2 "2" ANSI 150 lbs2 > 1 / > 2 " ANSI 150 lbsConnection: Foam conc.Female 1" BSPFemale 1" BSPFemale 1" BSP Weight5.5 kg10.5 kg13 kg MaterialBodyBrassBrassBrassFlangeGalvanized steelGalvanized steelDimensions approx: A218 mm330 mm330 mmB123 mm123 mm123 mm C43 mm100 mm100 mmIncludedFoam conc. check...

Open the catalog to page 2

Stationary Inline Inductor

Stationary Inline Inductor

Catalog excerpts

All SKUM catalogs and technical brochures