Bladder Tank Proportioner Mk 2

Product catalog summary

General Description: The Skum TP proportioners are designed for accurate foam proportioning across various flow and pressure conditions. Constructed from bronze, these devices are maintenance-free and suitable for industrial and marine environments.

Application Description: These proportioners work with bladder tanks to deliver precise foam to fire monitors and deluge systems, specifically in combination with the Skum bladder tank, MTB.

Product Features:

Complies with EN 13565-1 and NFPA 16 Ch 4 standards.
Supports foam mixing up to 3%.
Ensures accurate proportioning across the range.
Maintenance-free and corrosion-resistant bronze construction.

Installation: The proportioner is wafer-mounted between flanges for water and flanged or screw-threaded for foam, compatible with DIN PN16 or ANSI 150 lbs standards.

Listings and Approvals: Approved by Det Norske Veritas (DNV) and complies with EN 13565-1.

Performance Data: The datasheet provides detailed specifications for various models (TP-50, TP-80, TP-100, TP-150, TP-200, TP-250) including connection types, capacity, weight, and maximum working pressure. All models are made from bronze (Cu88Sn12) and have a maximum working pressure of 16 bar (235 psi).

Fitting Requirements: The proportioner must be installed with a minimum of five diameters of straight pipe before and three diameters after the unit. The water pressure into the tank should be maintained within four diameters upstream and a maximum distance of 10 meters.

Order Information: When ordering, specify the size, connection type (DIN or ANSI), and foam mixing rate percentage.

Catalog excerpts

Page 1 of 2 (replaces datasheets 1010/21 and 22) General description Skum TP proportioners guarantee accurate foamproportioning over a wide range of flow and pressure conditions; manufactured in bronze, they are maintenance-free and used in a wide range of industrial and marine environments. Application description The TP proportioner is used in conjunction withbladder tanks to supply accurate foam delivery to fire monitors and deluge systems. The TP is used in combination with the Skum bladder tank, MTB. Product features TP-200TP-250 TP-100TP-150 > Designed to meet the requirements of EN 13565-1 and NFPA 16 Ch 4 > Designed for foam mixing up to 3% > Accurate proportioning over the range > TP-100 TP-150 Water: Wafer mounted between flanges, see table > TP-200 TP-250 Foam: Flanged to fit DIN PN16 or ANSI 150 lbs or screw-threaded BSP, see table Listings and approvals > l/min bar Det Norske Veritas (DNV) Tested according to and complying withEN 13565-1 MTB > Foam concentrate Water pressure into tank D d d A Water supply Foam solution 4 x D 3 x DB 5 x D www.skum.com > Technical changes reserved without noticeCopyright թ 2007 Tyco Safety Products Datasheet Ref. SKM0022 DSA1 size="-4">

Open the catalog to page 1

Bladder Tank Proportioner Mk 2

Bladder Tank Proportioner Mk 2

Catalog excerpts

All SKUM catalogs and technical brochures