SKF Internal Bearing Puller Kits TMIP and TMIC Series

Fast and easy bearing dismounting from housings SKF Internal Bearing Puller Kits TMIP and TMIC series The SKF Internal Bearing Puller Kits are designed for dismounting bearings from housings, where the fit is on the outer ring. The pullers are constructed for optimum strength and durability and suit a wide range of bearing bore diameters. A sliding hammer allows high impact forces to be applied and is ergonomically designed to enhance user safety. TMIP series • Unique SKF design can reduce dismounting time • Unlike most internal bearing pullers, the spring loaded extractors can be quickly and...

Selection chart Bearing bore diameter Bearing DGBB The above tables only show a selection of popular bearings that can be dismounted using SKF Internal Pullers. There may be other bearings that can also be removed using the SKF TMIP or TMIC pullers. Technical data Designation Bearing bore diameter Total sliding hammer length Carrying case dimensions Technical data Designation Bearing bore diameter Total sliding hammer length

Technical data – extractors size Maximum bearing width Space behind bearing Housing depth TMIC 7-28 TMIC C7-8 TMIC C10-12 TMIC C12-15 TMIC C17-20 TMIC C22-28 TMIP 7–28 TMIP E7–9 TMIP E10–12 TMIP E15–17 TMIP E20–28 TMIP 30–60 TMIP E30–40 TMIP E45–60 TMIP 7–60 TMIP E7–9 TMIP E10–12 TMIP E15–17 TMIP E20–28 TMIP E30–40 TMIP E45–60 skf.com | skf.com/mapro | skf.com/lubrication ® SKF is a registered trademark of the SKF Group. © SKF Group 2020 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every...