Versatile two and three arm mechanical pullers SKF Standard Jaw Pullers TMMP series One of the most common ways to dismount small to medium size bearings is to use a basic mechanical puller. Using an SKF puller helps to safeguard against damage to the bearing or to the bearing seating during dismounting. SKF Jaw pullers allow for easy and safe puller operation. • Range of five different jaw pullers with two or three arms • Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in.) • Cone system for automatic centring and secure positioning of arms • Strong springs keep arms apart for easy operation • Hardened, high quality carbon steel

Designation TMMP 2x65 TMMP 2x170 TMMP 3x185 TMMP 3x230 TMMP 3x300 Effective length of arms 60 mm (2.4 in.) 135 mm (5.3 in.) 135 mm (5.3 in.) 210 mm (8.3 in.) 240 mm (9.4 in.) Maximum withdrawal force 6,0 kN (0.7 US ton) 18,0 kN (2 US ton) 24,0 kN (2.7 US ton) 34,0 kN (3.8 US ton) 50,0 kN (5.6 US ton) ©SKF is a registered trademark of the SKF Group. The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication...