SKF Mounting and dismounting fluids When using SKF hydraulic equipment such as hydraulic pumps, oil injectors and HMV hydraulic nuts it is important that the correct fluid is used for optimum performance. For high pressure applications, up to 400 MPa (58 000 psi), SKF has developed a mounting fluid and a dismounting fluid. The fluids have a high viscosity index, contain anti-corrosives and are non aggressive to most common seal materials such as nitrile rubber, Buna N (Perbunan), chrome leather, leather and PTFE. • • • • High viscosity index Non aggressive to most common seal materials LHMF 300 is available in 1 and 5 litre cans, and 205 litre drums LHDF 900 is available in 5 litre cans and 205 litre drums SKF Mounting fluid LHMF 300

Technical data Designation Specific gravity Flash point Pour point Viscosity at 20 °C (68 °F) Viscosity at 40 °C (104 °F) Viscosity at 100 °C (212 °F) Viscosity index Available pack sizes skf.com | mapro.skf.com | skf.com/lubrication ® SKF is a registered trademark of the SKF Group. © SKF Group 2017 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss...