SKF Mechanical tools accessories A range of accessories has been developed to further facilitate the ease of use of the SKF puller range

Effortless withdrawal force generation Advanced Hydraulic Spindles TMHS 75 and TMHS 100 TMHS 75 The SKF TMHS 75 and TMHS 100 generate a high pulling force with very little effort compared to the standard mechanical spindles. They significantly reduce the time needed to dismount a bearing or other component. • Integrated hydraulic cylinder, pump and spindle – no separate pump is required • Safety valve helps prevent overloading the spindle and the puller in case excessive force is applied • Long stroke helps enable dismounting in one operation • Spring-loaded nosepiece centre point allows easy...

Efficient and correct dismounting SKF Tri-section Pulling Plates TMMS series • The SKF TMMS series consists of five different sizes of tri-section pulling plates suitable for shafts with diameters ranging from 50 to 380 mm (2 to 15 in.) • Suitable for use in combination with three-armed pullers • The plates grip behind the bearing inner ring, helping to ensure that the pulling forces are only transmitted through the inner ring and not through the outer ring or the rolling elements; thereby minimising the risk of bearing damage • The tri-section construction allows an even dismounting force distribution,...

Puller accessory selection guide Puller series Designation Puller Protection Blankets TMMX series Force Generators Tri-section Advanced Hydraulic Pulling Plates Spindle TMHS series TMMS series TMMP series Standardjaw pullers TMMP series Heavy duty jaw pullers TMMR F series Reversible jaw pullers TMMR TMMR TMMR TMMR TMMR TMMR TMMR TMMR TMMA series SKF EasyPull TMMA 75H/SET TMMX 280 ** TMHS 75 ** TMMA 100H/SET TMMX 350 ** TMHS 100 ** TMHC 110E Hydraulic Puller kit TMHP 10E Hydraulic Puller kit TMHP 10E TMMX 210 TMMX 280* TMMX 350 TMMS 50* TMMS 100* TMMS 160 TMBS E series Strong...