SKF Hydraulic & Strong Back Pullers

SKF Hydraulic Jaw Puller Effortless bearing dismounting up to 100 kN SKF Hydraulic Jaw Puller Kit TMHP 10E • A versatile kit with three different arm lengths is suitable for a wide range of applications • Hydraulic spindle facilitates effortless dismounting • Self-locking arms minimise the risk of the puller slipping from the application when under load • The spring-loaded centre point of the hydraulic spindle allows easy puller centring • The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload • High load rating of 100 kN (11.2 US ton) makes the puller...

SKF Strong Back Pullers Easy bearing dismounting even in the tightest spaces SKF Strong Back Pullers TMBS E series The SKF TMBS E strong back pullers facilitate dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach. • Special separator design allows the puller to be easily inserted between the bearing and the shoulder on the shaft • The spring-loaded centre point of the hydraulic spindle allows easy puller centring • The firm grip behind the bearing’s inner ring reduces the force required...

Technical data – TMBS E series Maximum stroke Nominal working force Maximum reach Shaft diameter range Threading hydraulic cylinder Carrying case dimensions 1 × separator set 1 × mechanical spindle 1 × beam 2 × main rods 1 × separator set 2 × main rods 2 × extension rods, 125 mm (4.9 in.) 4 × extension rods, 285 mm (11.2 in.) 1 × beam 1 × hydraulic spindle TMHS 100 2 × extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in.) 1 × osepiece with centre point n for hydraulic spindle 1 × separator set 2 × main rods 2 × extension rods, 125 mm (4.9 in.) 4 × extension rods, 285 mm (11.2 in.)...