SKF High performance, high temperature bearing grease LGHP 2 SKF LGHP 2 is a premium quality mineral oil based grease, using a modern Polyurea (di-urea) thickener. It is suitable for electric motors and similar applications. • • • • • • • Extremely long life at high temperatures Wide temperature range Excellent corrosion protection High thermal and mechanical stability Good start-up performance at low temperatures Compatibility with common polyurea and lithium thickened greases Low noise properties Typical applications • • • • • Electric motors: Small, medium and large Industrial fans, including high speed fans Water pumps Rolling bearings in textile, paper processing and drying machines Applications with medium and high speed ball (and roller) bearings operating at medium and high temperatures • Clutch release bearings • Vertical shaft applications • Kiln trucks and rollers Available pack sizes Packsize

Technical data Designation NLGI consistency class Operating temperature range Dropping point DIN ISO 2176 Base oil viscosity 40 °C, mm2/s 100 °C, mm2/s Corrosion protection Emcor: standard ISO 11007 – – water washout test – salt water test (100% seawater) Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubrication ability R2F, running test B at 120 °C Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs Penetration DIN ISO 2137 60 strokes, 10–1 mm 100 000 strokes, 10–1 mm Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm Fretting corrosion ASTM D4170 (mg) Lubrication...