SKF Extremely high viscosity bearing grease with solid lubricants LGEV 2 SKF LGEV 2 is a mineral oil based grease, using a lithium-calcium soap. Its high content of molybdenum disulphide and graphite, in conjunction with an extremely high viscosity oil, provide outstanding protection under the harshest conditions involving high loads, slow rotations and severe vibrations. • Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur • Extremely mechanically stable providing good water resistance and corrosion protection Typical applications • • • • • • Trunnion bearings on rotating drums Support and thrust rollers on rotary kilns and dryers Bucket wheel excavators Slewing ring bearings High pressure roller mills Crushers Available pack sizes Packsize Electro-mechanical lubricant dispensers TLMR 101 series 380 ml refill (incl. battery) TLMR 201 series 380 ml refill LGEV 2/0.4 LGEV 2/18 LGEV 2/50

Technical data Designation NLGI consistency class Operating temperature range Corrosion protection Emcor: standard ISO 11007 – – water washout test – salt water test (100% seawater) Penetration DIN ISO 2137 60 strokes, 10–1 mm 100 000 strokes, 10–1 mm Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm V2F test Oil separation DIN 51 817, 7 days at 40 °C, static, % EP performance Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4 Lubrication management Just as asset management takes maintenance to a higher level, a lubrication management approach allows lubrication...