Extreme pressure low temperature bearing grease LGWM 1 SKF LGWM 1 is a low consistency mineral oil based grease, using a lithium soap and containing extreme pressure additives. It is extremely suitable for the lubrication of bearings operating under both radial and axial loads. • • • • Good oil film formation at low temperatures down to –30 °C (–20 °F) Good pumpability down to low temperatures Good corrosion protection Good water resistance Typical applications • • • • Wind turbine main shafts Screw conveyors Centralised lubrication systems Spherical roller thrust bearing applications Available pack sizes Packsize Electro-mechanical lubricant dispensers TLMR 101 series 380 ml refill (incl. battery) TLMR 201 series 380 ml refill

Technical data Designation NLGI consistency class Operating temperature range Penetration DIN ISO 2137 60 strokes, 10–1 mm 100 000 strokes, 10–1 mm Corrosion protection: Emcor: – standard ISO 11007 – water washout test Oil separation DIN 51 817, 7 days at 40 °C, static, % EP performance Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N Fretting corrosion ASTM D4170 (mg) Lubrication management Just as asset management takes maintenance to a higher level, a lubrication management approach allows lubrication to be seen from a wider point of view. This approach helps to...