SKF Air-driven Hydraulic Pumps and Oil Injectors, THAP E series 30, 150, 300 and 400 MPa (4 350, 21 750, 43 500 and 58 000 psi) The THAP E air-driven hydraulic pumps and oil injectors are available in four different pressure versions. They can be used for mounting OK Couplings, large pressure joints such as bearings, flywheels, couplings and railway wheels. The THAP E unit consists of a hydraulic pump or high pressure oil injector, driven by an air motor. The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The units can also be supplied in complete sets, consisting of a THAP E and such accessories as a pressure gauge, high pressure pipe or pressure hose. • Time savings compared to hand operated pumps and oil injectors • Portable • Continuous supply of oil • Internal air pressure limiter helps ensure safe operation • Low air consumption • Wide operating temperature range • Sturdy storage boxes • Low, medium and high pressure units • SKF OK Couplings • Mounting bearings • Mounting ship propellers, rudder pintles, railway wheels and other similar applications

Technical data Designation Nominal hydraulic pressure Operating air pressure i) Volume/stroke Oil outlet Length Height Width Weight Also available as complete set in carrying case THAP 030E/SK1 Consisting of pump, high pressure hose and connecting nipples. THAP 150E/SK1 Consisting of pump, pressure gauge, high pressure hose and connecting nipples. THAP 300E/SK1 Consisting of oil injector, pressure gauge and high pressure pipe. THAP 400E/SK1 Consisting of oil injector, pressure gauge and high pressure pipe. 1) Air pressures above 7 bar are automatically limited to 7 bar by an internal...