SKF TMBH 5 A light and compact solution for bearing heating

A light and compact solution for bearing heating Portable induction heater TMBH 5 The SKF Portable induction heater TMBH 5 is designed for use in maintenance, to heat roller bearings that are mounted onto a shaft with an interference fit. Heat causes the bearing to expand, which removes the need to use force during installation. The TMBH 5 generates a temperature difference between bearing and shaft – enough to enable installation. It can also be used to heat other ring-shaped, metallic components. A reduced power setting allows sensitive components to be heated more slowly. The TMBH 5 relies...

The TMBH 5 runs in two modes: Temperature Mode, where the operator selects the desired bearing temperature; and Time Mode, allowing a bearing or component to be heated for a specified length of time. Sophisticated medium-frequency technology and the use of appropriate materials make the heater lightweight and portable. A built-in handle, and storage pockets for ancillary equipment, add to its portability and convenience. Power regulation Noise level The induction clamp’s thin fingers mean the user does not need to choose a different yoke for each component. This increases the number of different...

Light and portable enough to be carried by its handle TMBH 5 The TMBH 5 is versatile enough to be used in a range of situations – including at a work bench, on the factory floor or out in the field. Typical applications include maintenance and service jobs on gearboxes, pumps, fans and blowers. It includes a carrying handle, weighs only 3 kg (6.6 lb) and is very compact. This makes it one of the smallest, most portable induction heaters on the market. The light weight and built-in handle make it portable to use in a variety of locations, while it can easily be stored in a locked place such as...