Grid and gear coupling grease LMCG 1 LMCG 1 is a polyethylene thickened and mineral oil based grease which also uses a lithium complex thickening technology. The grease is formulated to withstand high centrifugal forces and high-torque applications for grid and gear (flexible) couplings even where severe shock loadings, misalignment and vibration occur. Leakage is prevented at high speeds and the grease is stable in consistency. The special additive formulations make the grease suitable for applications subjected to high loads, high torque, wet environments, a wide range of speed regimes and wide range of temperatures • • • • • Excellent resistance to oil separation High acceleration and high operating speeds Excellent high-torque lubrication High corrosion protection Exceeds AGMA Type CG-1 and AGMA Type CG-2 requirements Typical industries • Heavy industries (mining, mineral processing, cement, steel, pulp & paper). • Marine industry. • General machinery (petrochemical, power generation plants, etc.). Available pack sizes Packsize Typical applications • Grid and gear couplings • Flexible heavy duty grid

Technical data Designation NLGI consistency class Operating temperature range Corrosion protection SKF Emcor standard ISO 11007 EP performance Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4 Typical value Lubrication management Just as asset management takes maintenance to a higher level, a lubrication management approach allows lubrication to be seen from a wider point of view. This approach helps to effectively increase machine reliability at a lower overall cost. SKF Client Needs Analysis Lubrication Management Improvement proposal Normally implies one day of assessment...