Group: SKF
Catalog excerpts
20V Battery driven grease gun For intensive use in challenging environments The TLGB 1886-E battery driven grease gun offers the key features you need for tough jobs. The versatility of the two-speed design enables you to address all lubrication points with a single tool, protecting your equipment from costly repair and downtime. The tool’s high-ratio gearing will move large quantities of grease quickly when needed, while its low gearing supports deliveries of up to 700 bar. Thanks to its ergonomic rugged design, high-performance motor positioning and efficient handling, the TLGB 1886-E has been designed to withstand the intensive use found in demanding industries such as agriculture, construction, automotive, trucking, heavy equipment and wind energy. • High performance for intensive use • Built-in LED illuminates the work area • LED indicators identify loss of prime, empty cartridge or blocked fittings • Trapped air inside of the grease gun can be easily removed with the vent valve to restore priming • High-pressure hose with protective antikink spring guards on each end • Heavy-duty composite body with protective rubber overmold • Easily and cleanly filled from drums with filler pumps • Battery charge LED indicator skf.com | skf.com/agriculture ® SKF and Lincoln are registered trademarks of the SKF Group. © SKF Group 2022 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. PUB MP/P8 19431 EN · June 2022 Technical data Designation Grease output Low speed setting High speed setting Maximum operating pressure Maximum peak pressure Cartridges per battery charge Length of hose Battery type Battery output Battery capacity Voltage charger, V/Hz Carrying case dimensions Weight (incl. battery) Total weight (incl. case) Accessories TLGB 1871 TLGB 1872 TLGB 1875A TLGB 20-1 TLGB 20-3 TLGB 1230 TLGB 1886-E 100 ml/min (3.5 oz/min) at 70 bar pressure 284 ml/min (10 oz/min) at 70 bar pressure 550 bar (8 000 psi) 700 bar (10 000 psi) 8.6 cartridges (200 bar counter pressure, low speed) 18 cartridges (free flow) 1220 mm (48 in) Li-Ion 20 V 2 500 mAh 200–240 V/ 50–60 Hz 650×140×393 mm (25.6×5.5×15.5 in) 3.4 kg (7.5 lb) 7.9 kg (17.4 lb) 20 V 2.5 mAh Li-Ion battery 20 V 4.0 mAh Li-Ion battery 12/24V Battery charger for 12/20V (Li-Ion) grease guns Shoulder strap High pressure hose 900 mm (36 in)
Open the catalog to page 1All SKF Maintenance catalogs and technical brochures
-
SKF Induction heaters
12 Pages
-
SKF Couplings
112 Pages
-
SKF Transmission Chains
98 Pages
-
SKF Xtra Power Belts
24 Pages
-
SKF Gloves
2 Pages
-
SKF Oil Check Monitor TMEH 1
2 Pages
-
SKF Infrared thermometers
4 Pages
-
Oil leveller LAHD series
2 Pages
-
SKF Grease Pumps LAGG series
2 Pages
-
Chassis grease LGLS 2
2 Pages
-
Manual lubrication tools
4 Pages
-
Anti-fretting agent LGAF 3E
2 Pages
-
SKF Stroboscopes TKRS series
4 Pages
-
SKF Shaft Alignment Tools
20 Pages
-
SKF Vibracon
8 Pages
-
SKF Chain Oils
4 Pages
-
SKF Hydfraulic pump THHP 300
2 Pages
-
SKF Power Transmission Belts
170 Pages
-
SKF FX Keyless Bushings
32 Pages
-
SKF Conveyor Chains
140 Pages
-
TMIP and TMIC Series
4 Pages
-
SKF TWIM 15
4 Pages
-
Spanners and sockets
8 Pages
-
Elevator lubrication sets
2 Pages
-
SKF Combi Kit TMMK series
4 Pages
-
SKF Spherical washers
2 Pages
-
Oil conditioning station
8 Pages
-
TIH L MB series
2 Pages
-
SKF Blind housing pullers
4 Pages
-
Mechanical tools
4 Pages
-
SKF Thermometer TKDT 10
2 Pages
-
SKF Pressure Gauges
2 Pages
-
SKF EasyPull TMMA series
4 Pages
-
TIH L33 series
2 Pages