HCC – Hose connection control For monitoring of lubricant feed lines to bearing points on construction machines exposed to extreme loads and stresses – like shovels and backhoes The electrical HCC hose connection control is a monitoring and signalling unit to reliably check lubricant feed lines for breaks. This unit shows the driver or operator of the machine immediately if there is a fault by sending a collective fault signal. Benefits • Easy and reasonably priced way of monitoring difficult to access lines to lubrication points. Hose breaks are detected immediately. • Production downtime and serious bearing damage can be largely avoided. • A broken hose line is indicated by an easily recognizable visual signal. The driver/operator can query an OK signal, e. g. via the machine control. • Risk of accidents and environmental pollution by leaking lubricant can be significantly reduced. • Easy to retrofit into already existing lubrication systems. • Expandable at any time. • System operation independent of temperatur

HCC – Hose connection control Technical data Isolating point connector Supply voltage OK signal Connection stud Operating pressure Max. admissible pressure Operating temperature of the mechanical components Analyser unit Supply voltage OK signal Max. number of hoses to be monitored per analyser unit Dimensions (L x W x H) Operating temperature Storage temperature SKF Lubrication Systems Germany GmbH Heinrich-Hertz-Str. 2–8 · 69190 Walldorf · Germany Tel. +49 (0)6227 33-0 · Fax +49 (0)6227 33-259 ® SKF is a registered trademark of the SKF Group ® Lincoln is a registered trademark of Lincoln Industrial...