Pressure sensor DSC3 Digital pressure switch with hysteresis and window function mode Oil or fluid grease up to NLGI 0 max. 300 bar (4 350 psi) -25 to +80 °C (-13 to 176 °F) 2 x PNP transistor stages 2 x G1/8 via t-connector M 12×1 4-pin socket Applications • Machine tools • Printing machines • Wind turbines • Service vehicles • Steel and heavy

Product information Standard 4-pin conntection socket 4-digit alphanumeric digital display Interface for easy configuration and programming Lightweight corrosion resistant plastic body T-connector with G1/8 inlet and outlet 2 holes for fixing screws Technical data DSC3 sensors are electronic pressure switches with an integrated digital display for relative pressure measurement. They are used primarily for pressure monitoring. Depending on the design, they also can assume control functions. Pressure switch points, pressure indication and the switching logic can be configured and programmed easily....

Technical drawing Electrical connection

skf.com/lubrication ® SKF and Lincoln are registered trademarks of the SKF Group. © SKF Group 2022 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. PUB LS/P2 19080 EN · March 2022 Certain image(s) used under license from Shutterstock.com.