Group: SKF
Catalog excerpts
Gear pump units Product series MKx For oil and fluid grease For use in SKF MonoFlex single-line systems and centralized oil+air lubrication systems The units in the MKx product series are used in SKF MonoFlex single-line systems and include a pre-installed pressure regulating valve and pressure relief valve. The units in the MKx product series can be supplied with an optional pressure gauge for visual monitoring of pressure changes in the main line. Electrical pressure monitoring can be carried out by an integrated pressure switch. Fill level monitoring is also possible if required. The units are controlled externally via the machine control system or via an integrated control unit. Furthermore, units can be supplied with a pushbutton allowing interim lubrication to be activated manually at any time. All important functions are integrated into the lid. A plastic cap protects the electrical components from environmental influences such as dirt and dust. The modular structure of the units of the MKx product series makes them attractive to machine manufacturers as well as to end users and dealers.
Open the catalog to page 1Important information on product usage All products from SKF may be used only for their intended purpose as described in this brochure and in any instructions. If operating instructions are supplied with the products, they must be read and followed. Not all lubricants are suitable for use in centralized lubrication systems. SKF does offer an inspection service to test customer supplied lubricant to determine if it can be used in a centralized system. SKF lubrication systems or their components are not approved for use with gases, liquefied gases, pressurized gases in solution and fluids...
Open the catalog to page 2Distinguishing features of the gear pump units Description of the models Gear pump unit MKU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Gear pump unit MKF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Gear pump unit MKL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 System layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Diagram...
Open the catalog to page 3Description of the models Gear pump unit MKU Units from the MKU product series are suitable for pumping oil with a viscosity range of 20 to 1500 mm /s. The units are available in the following reservoir designs: • • • • 2 liter plastic reservoir 3 liter plastic reservoir 3 liter metal reservoir 6 liter plastic reservoir The units can be fitted with an optional pressure switch and/or fill level switch. Electrical connections are made using DIN built-in connectors or cable fittings. Units with reservoir capacity of 3 or 6 liters can be supplied with an optional integrated control unit. Gear...
Open the catalog to page 4SKF MonoFlex system structure Prelubrication, relubrication, and oil+air distributor system SKF MonoFlex single-line centralized lubrication systems with single-line distributors generally consist of a lubrication unit, the single-line distributors, and the lubrication lines. The pressure regulating valve and pressure relief valve required for the singleline centralized lubrication system’s operation are integrated into the lubrication unit. If pressure losses of greater than 10 bar are expected in the single-line centralized lubrication system, for example due to a wide expansion of the...
Open the catalog to page 5SKF MonoFlex gear pump unit Diagram of the various combination options for the MKU product series Connector types Unit with 2 liter plastic reservoir Pressure gauge Cable fittings / plugs Pressure switch Unit with 3 liter plastic reservoir Fill level switch for min. oil level Gear pumps Delivery rate 0.1 l/min 0.5 l/min Unit with 3 liter metal reservoir Terminal strip Control units Unit with 6 liter plastic reservoir
Open the catalog to page 6Gear pump unit, product series MKU Configurator Delivery rate 1 = 0.1 l/min Lubricant reservoir, control 1 Lubricant reservoir Control A = no control, with terminal strip B = no control, with terminal strip and pushbutton If control C, D, or E is selected, monitoring C must be selected. If control E is selected, electrical connection 1 must be selected. For description of control units, see page 16–17. Selected code number for electrical connection Code number for delivery rate Selected code number for pressure gauge Selected code letter for monitoring Selected code letter for control...
Open the catalog to page 7SKF MonoFlex gear pump unit Diagram of the various combination options for the MKF product series Connector types Unit with 2 liter plastic reservoir Pressure gauge Cable fittings / plugs Pressure switch Unit with 3 liter plastic reservoir Gear pumps Delivery rate 0.1 l/min Unit with 6 liter plastic reservoir Terminal strip Control units Fill level switch for min. fluid grease level
Open the catalog to page 8Gear pump unit, product series MKF Configurator Order code Lubricant reservoir, control 1 Lubricant reservoir Selected code number for electrical connection Selected code number for pressure gauge Selected code letter for monitoring Delivery rate Selected code letter for control F = fluid grease lubricant Selected code number for lubricant reservoir Code number for delivery rate Frequency Control Electrical connection 0 = 2 cable fittings 1 = 1 cable fitting; 1 rectangular connector 2 = 1 circular connector M12×1; 1 rectangular connector 4) 3 = 1 sealing plug; 1 cable fitting If control C,...
Open the catalog to page 9SKF MonoFlex gear pump unit Diagram of the various combination options for the MKL product series Connector type Unit with 3 liter plastic reservoir Pressure gauge Cable fittings Pressure switch Unit with 3 liter metal reservoir Gear pumps Delivery rate 0.1 l/min Unit with 6 liter plastic reservoir Fill level switch for min. oil level
Open the catalog to page 10Gear pump unit, product series MKL Configurator Order code Lubricant reservoir, control, monitoring, pressure gauge, electrical connection 2 Only possible with delivery rates 0.1 und 0.2 l/min Lubricant reservoir Code number for electrical connection Selected code number for pressure gauge Code letter for monitoring Delivery rate Code letter for control Code number for lubricant reservoir Code number for delivery rate F = control unit IG54-20-S4-I 1) C = monitoring with fill level switch (NC contact) and pressure switch 20 bar (NO contact) Pressure gauge 0 = without pressure gauge 1 = with...
Open the catalog to page 11All SKF Lincoln Automatic Lubrication Systems catalogs and technical brochures
-
Pump unit PPS30
4 Pages
-
ECP Product brochure
8 Pages
-
Product series 143 brochure
24 Pages
-
Wire rope lubrication system
8 Pages
-
Single- and Multi-circuit Pumps
16 Pages
-
LubriLean brochure
4 Pages
-
1154 flyer
2 Pages
-
EDL1 product brochure
4 Pages
-
DSA product brochure
4 Pages
-
DSC3 product brochure
4 Pages
-
DSB product brochure
4 Pages
-
HCC product brochure
2 Pages
-
LMC 301 product brochure
8 Pages
-
SFZM product brochure
4 Pages
-
SP/SMB14 product brochure
8 Pages
-
SP/SMB13 product brochure
8 Pages
-
SMBM product brochure
18 Pages
-
Safeflow product brochure
4 Pages
-
SMT 1 product brochure
8 Pages
-
LP2 / LPC product brochure
8 Pages
-
PSG product brochure
36 Pages
-
VP product brochure
20 Pages
-
VPK product brochure
20 Pages
-
VPB product brochure
12 Pages
-
SPVS product brochure
8 Pages
-
SKF Maxilube Solution
8 Pages
-
SGA/SG product brochure
6 Pages
-
SLC product brochure
12 Pages
-
SL-6 product brochure
4 Pages
-
SL-32HV product brochure
2 Pages
-
310 series product brochure
4 Pages
-
BPH product brochure
4 Pages
-
Lubrigun product brochure
15 Pages
-
EOP2 product brochure
2 Pages
-
MPB product brochure
2 Pages
-
FK product brochure
12 Pages
-
VectoLub product brochure
30 Pages
-
Gear Pump Units brochure
12 Pages
-
P502 product brochure
2 Pages
-
LubriLean product brochure
16 Pages
-
P603S product brochure
8 Pages
-
P212 product brochure
2 Pages
-
P205/ P215 product brochure
2 Pages
-
Product Series OLA, MV and 161
28 Pages
-
CLK product brochure
8 Pages
-
Pulse meter IPM
4 Pages
-
Gear wheel indicator SFZM
4 Pages
-
Oil conditioning unit OCU
4 Pages
-
LFC 5000
4 Pages
-
SSV-D
2 Pages
-
Improved Centro-Matic SL-11
12 Pages
-
SL-V XL
4 Pages
-
12-volt Reel 'n F
2 Pages
-
New 90-lb. Reservoir
12 Pages
-
HTL 429
4 Pages
-
Lincoln
8 Pages
-
AC FlowMaster
12 Pages
-
EOS
2 Pages
-
LFR Series
4 Pages
-
Hand Vacuum Pumps
6 Pages
-
Pumps PMV Pump Family
16 Pages