IRUV Cut Coat H-SC for window Glass Thermo ECO Shield Heat Shield pu for outdoor unit For roof-top

IRUV Cut Coat H-SC is a coating product that improves the heat shielding of glass windows. The coating leads to 20~30% of Energy Savings on air-conditioning energy consumption cost. [ 5mm thick single glass ] [Before Coating] [After Coating] UV rays Cut Ratio = 18% -UV rays Cut Ratio = 100%) Visible Light Transmittance =88% -Visible Light Transmittance ratio =70% Near Infrared rays Cut Ratio= 19% -Near Infrared rays Cut Ratio = 90%

IRUV Cut Coat H-SC Advantages on Glass Windows Heat-blocking effect: Increases near-infrared cut rate by approximately 90% or more. Near-infrared cut of 90% or more is achieved Reduces direct solar heat during summer by approximately 8℃ to 15℃. Ultraviolet Rays blocking effect: 99% UV-Rays blocked Prevents fading of merchandise, flooring etc. Deters flying insects with compound eyes Condensation reduction: 50% condensation reduction Minimizes water dripping 15-year weather resistance with a 10-year reinstallation guarantee. 2 times more durable and longer-lasting than regular window films. *...

Temperature comparison between Showroom’s Coated and Uncoated area. Temperature measurement period: August 26, 2021 to September 7, 2021 Maximum temperature difference: 19.4℃ ~20℃ Uncoated(℃） Uncoated(℃） Because the building faces southeast, the temperature difference begins to appear at around 7:00 a.m. The amount of sunlight reaches its peak at around 10:30 a.m., when the temperature difference is greatest. "Until now, we couldn't use the showroom in the mornings because of the heat, but after the

Uncoated glass 10.9C Coated glass next to it 13.7C Coated glass in the same room 14.8C The surface temperature of the uncoated and coated window glass surfaces next to each other is 13.7C due to the heat being pulled between them. The coated glass surfaces in the same room are 14.8C. It has been demonstrated that by absorbing heat from inside the room and raising the surface temperature of the window glass, it reduces the loss of heat through the window (insulating effect), prevents the window from getting cold, and inhibits condensation.

Installation Track Record with National Chain Stores DAISO SHOP: Over 1,200 Stores Serviced Nationwide from 2020 to 2023 Approximately 40 to 100 sqm of Window Glass per Store Drug Store Mori: Over 100 New Stores Serviced Nationwide from 2020 to 2025 Approximately 100 to 120 sqm of Window Glass per Store

Satisfied Customers across Japan 【Amazon Odawara warehouse】 【KEWPIE Mayonnaise headquarters 】 【Tokyu hospital】 【 Kagoshima District Legal Affairs Bureau Kirishima Branch 】 【 Ministry of Internal Affairs and Communications 】 【 Hotel Japan Shimoda 】 【 Sapporo Beer Chiba Factory 】 【 Tokyo Gakukan Niigata High School 】 【 Edogawa City Hall 】 【 Japan Atomic Energy Agency 】 【 Kawasaki Heavy

"UV Shield PU" is a new UV-cut coating that combines the UV-blocking base coat used in IRUV Cut Coat with transparent aliphatic polyurea. It can be applied transparently to signs, exterior surfaces, glass, PET film, acrylic, polycarbonate (PC), and wood. When applied to faded signs, it restores their original color and appearance, maintaining that condition for over 15 years. This extends the durability of signs—previously replaced every 5 to 7 years—to more than double, contributing to significant cost savings. a.nvtdn—s>-e*ffiLr.iEH!a <sob'Ob®«i>ianr>SBii«tfRA*».*

Example Application of UV Shield PU — Ultra-Weather-Resistant Polyurea for Signboards

Signboard Replacement Cycle and Costs in Japan New Method Conventional Method Future Method Traditional Method 【Signboard Sheet Replacement Work】 Replacement Period: Once every 5 to 7 years Replacement Period: Once every 15 years Installation Cost Comparison Over a 15-Year Period

Product ③： Thermo ECO Shield with Anti-Rust ＆ Anti-fouling Thermo ECO Shield application system achieves Rust prevention, heat insulation and antifouling shield. As a result, the load on the compressor is reduced leading to energy savings of 15% or more. . THERMAL PAINT for outdoor unit waterproof auxiliary Heat Reflection Anti-Static, Super Hydrophilic & rust-proof coating & Thermal insulation Paint Antifouling Coat 「Rust Shield」 & maintaining reflectance 「Super Glass Barrier」 still white

2 reasons why the heat shield and insulation performance is superior to other products ●Reason1： The higher the hollow bead content, the higher the insulation performance. Thermo Eco Shield contains 12% hollow beads in the paint (60% in the paint film after application), which is more than twice that of other companies. Competitor's thermal insulation paint White thermal insulation paint hollow silica balloon Roof or outdoor unit exterior Assuming that the film thickness of the entire coating film is 300μm, The film thickness of the hollow beads is 90-120μm.(30-40% of total ratio) Thermo ECO...

2 reasons why the heat shield and insulation performance is superior to other products ●Reason2： The most important point in maintaining the heat shielding performance is not to reduce the infrared reflectance. Reflectance is maintained by applying antistatic super hydrophilic antifouling coating "Super Glass Barrier". Test in Korea 4monts later Degradation of white color due to adhesion of dirt Direct reflection Infrared reflection Direct reflection Dirt adhesion reduces reflectance Tokyo Big Sight West Building 2 months after painting Thermal Paint + super glass barrier White thermal paint...

Outdoor Unit and Surrounding Area Coating Only — For Structural Protection and HVAC Energy Efficiency ① Reduces thermal load on the interior of outdoor units to prevent highpressure cutoffs ② ¥8,800/sqm (in Japan), with 3-year depreciation and 10-year weather resistance ③ 10–15% Energy Savings – 3-Year Payback, 7 Years of Profit ④ Heat shielding in summer, insulation in winter for energy savings on cooling and heating ⑤ Protects the housing of air conditioning and refrigeration units, extending their lifespan ⑥ 10-year anti-rust warranty for metal roofs and outdoor units ⑦ Unique anti-stain coating...