Thermo-FID MK and MK IP65

Product catalog summary

Product Overview: The document provides technical specifications for the Thermo-FID MK and MK IP65 flame ionization detectors, designed for various industrial applications including environmental protection and research. These devices are used for emission control and process optimization.

Specifications:

Models: MK and MK IP65
Weight: MK - 44 kg, MK IP65 - 49 kg
Dimensions: MK - 470x520x465 mm, MK IP65 - 500x520x465 mm
Display Options: ppm, mg/m³, g/m³, Vol%, %LEL
Linearity: < 4% above measurement range
Output: 0(4)mA to 20mA, 600Ω burden
Operating Conditions: -5°C to 40°C, < 90% relative humidity
Protection Class: MK - IP54, MK IP65 - IP65

Technical Design: The FID features an integrated CPU for menu-driven handling, automatic self-control, and failure analysis. It includes a process-controlled amplifier for optimal signal processing.

Accreditations: Complies with 17. BImSchV / TA Air, QAL 1, and MCERTS standards.

Measurement Capabilities:

Range: 0.5 mg org.C/m³ to 100000 mg org.C/m³
Detection Limit: < 0.01 mg org.C/m³
Response Time: < 0.5 s for values > 20 mg org.C/m³

Operational Requirements:

Sample Gas: 25 l/h at 1013 hPa
Detector Temperature: T2: 110°C to 200°C
Instrument Air: 3.0 to 3.9 Bar
Fuel Gas: Hydrogen, 0.7 to 1.0 Bar

Order Data and Options: Includes options for status and alarm boards, dilution probes, and external zero gas conversion kits.

Contact Information: SK Elektronik, Benzstr. 23-25, D-51381 Leverkusen, Tel. +49 2171 3955-0, Fax. +49 3955-49, www.sk-elektronik.de, [email protected]

Catalog excerpts

Thermo-FID MK and MK IP65 Flameionisationdetector – Measuring head Technical Data Models Measured value display Completely mounted analyser in a fieldhousing for the rough applications in the field. With a measuring head attached directly without any filter or sample gas conditioning to a DIN gauge connection. Over a status signal or by the remotecontrol function it is possible to control and see the analyser function in real-time. The housing is available in protection class IP 54 or in protection class IP65. (Exhaust Emission control; Plant monitoring) General application Vol% %LEL Linearity < 4% above measurement range Measured value output 0(4)mA to 20mA; burden 600Ω not galvanically isolated Ambient temperature Geographical altitude Probe tube

Open the catalog to page 1

Vacuum system Measurement range 17. BImSchV / TA Air (936/806016) QAL 1 (DIN EN 14181 and DIN EN ISO 14956) MCerts (Sira MC 050062/00) Injectors 0.5 mg org.C/m³ to 100000 mg org.C/m³ Detection limit Dilution probe Response time (T90) Samplegas (self-drawed) < 0.5 s if measured value > 20 mg org.C/m³ < 5.0 s if measured value < 20 mg org.C/m³ ca. 25 l/h with 1013 hPa alternative ca. 2l/h; ca. 5l/h; ca.60l/h Supplementary heating system (PT100) at the measuring head for the probe Catalyst-temperature 3.0 Bar to 3.9 Bar /< 2 Nm³/h Quality to ISO8573-1 minimum 1.2.1 Hydrogen 0.7 Bar to 1.0 Bar /...

Open the catalog to page 2

Order data Thermo-FID Measuring head ‚MK’ With measuring head IP 54 4 x 0/4-20mA galv. seperation/ 4 potentialfree alarmcontacts Conversion kit zerogas external Conversion kit zerogas external and synthetic air as burnerair Back Purge Sample Filter Thermo-FIDMeasuring head ‚MK IP65’ Thermo-FID ‚MK IP65’ with vortexcooler Options Status- and alarmboard Dilution probe 1:10/ 1:20 External Zerogas

Open the catalog to page 3

www.sk-elektronik.de [email protected]

Open the catalog to page 4

Thermo-FID MK and MK IP65

Thermo-FID MK and MK IP65

Catalog excerpts

All SK ELEKTRONIK GMBH catalogs and technical brochures