Sitron's Line Of Vibrating Tuning Forks
7Pages

{{requestButtons}}

Catalog excerpts

Sitron's Line Of Vibrating Tuning Forks - 1

Һ F (80 C) and has a maximum working pressure of 725 PSI (50Bar). All models are made with 316 S.S. and are available with PTFE coatings or in hygienic versions for sanitary applications. Standard probes are available with 3/4ڔ up to 1 BSP or NPT process connection and insertion length L= 3 1/8Ԕ (L= 80mm). The V-Tork is a point level switch that is designed to detect low or high level of liquids (such as water and oil), thick and turbulent fluids, as well as corrosive mediums and pastes (depending on viscosity). Due to its simple and rugged controlled system, the V-Tork is virtually unaffected by any chemical or physical properties of the mediums and can be installed at any angle of the pipe or tank. It is ideal for multiple-purpose processing where the probes must be compatible with a variety of process materials and process conditions. The V- Tork does not require recalibration between batches and can also be cleaned in place. The V-Tork can operate in temperatures up to 176 > Sitron's V-Tork is based on the vibrating tuning fork principle, using piezo-electric crystals. The switch vibrates at a resonant frequency. When the tuning fork is submerged in the product, the frequency will change. This change is detected by the integrated oscillator and converted into a switching output. (The integrated electronics evaluates the level signals, according to the oscillation of the sensor's crystal, and then provides an accurate output signal). >

Open the catalog to page 1
Sitron's Line Of Vibrating Tuning Forks - 4

The MVTK-DC (Mini V-Tork) is the most compact version of the vibrating point level switches that is also designed to detect the level of several types of liquids and some fine solids. The Mini V-Tork DC is available with a DC voltage supply and a transistor output. The electronics are integrated within the 316 S.S. body to best suit any space constraint issues relating to the application. A visual indication is given that shows the working status of the unit. The MVTK-DC can be made with a great variety of process connections, such as threaded, sanitary or flange and can be PTFE coated when...

Open the catalog to page 4
Sitron's Line Of Vibrating Tuning Forks - 7

ORDERING INFORMATION CodeVTK - DCVTK - RMVTK - DCMVTK - ACCode123 456CodeBN H0CodeSLCodeNACodeC MTCodePTFE0X Supply voltage 20 - 60 VDC / 20 - 264 VAC / 1 relay SPDT 250 VAC - 5A max.Supply voltage 20 - 60 VDC 2" Tri-Clamp3/4" ThreadType of threadBSP Hallar / Tefzel EnclosureGlass filled nylonInsertion lengthNPT SpecificationsProcess Connection Other - Specify Supply voltage 20 - 60 VDC 3 wire 1" Thread1 1/2" Tri-ClampHygienic Fitting with Coupling Other - SpecifyL=3 1/8" (80mm) - StandardNot a thread NoneOther - Specify Aluminum die castCoatingElectrical ConnectionCable gland with 1/2"NPT...

Open the catalog to page 7

All Sitron catalogs and technical brochures

  1. VDX500

    6 Pages

  2. Series: SP

    27 Pages

  3. Series: STD

    7 Pages

  4. Series: SPD900

    13 Pages

  5. Series: LH

    19 Pages

  6. SC750 Series

    2 Pages

  7. CF420

    3 Pages

  8. CN1 & CN2

    2 Pages

Archived catalogs

  1. Flow

    9 Pages