Sitron 2016 Line Card
28Pages

Decades of experience in process measurement: Flow, Level, Pressure, Vibration and Temperature With decades of experience in the field of industrial process measurement and control, Sitron provides an unmatched level of service for both pre and post sales, ensuring that our products are properly specified and applied within each customer's unique application requirements. Sitron is a privately held company with manufacturing and sales headquarters located in Sao Paulo, Brazil and with an international sales office in New York. We are a pioneer in the manufacture of process controls in...

- Personalized service - Product quality and reliability across our line - Years of experience in the field of instrumentation - Short delivery times or "Rushed" deliveries upon request - Specialized technical team for timely support (pre and post sales) - Customized product configurations made in accordance with the needs of each customer's unique process requirements Ultrasonic Optic

Flow Switch The CF line of thermal dispersion flow switches are designed to detect the flow of liquids and gases (air) in tubes or ducts and may also be used for liquid level detection. Output: SPDT Relay Output: 2x SPDT Relays Output: 2x SPDT Relays Panel Mounting Output: Relay (NA+NF) Remote Set Point Adjustment THE MOVEMENT OF A LIQUID OR A GAS AS IT FLOWS OVER THE TIP OF THE SWITCH DISPERSES SOME OF THERMAL ENERGY THAT IS GENERATED BY THE SWITCH. THE UNIT ALSO GENERATES A FIXED TEMPERATURE TO HAVE AS A REFERENCE POINT. MLCROPROCESSED ELECTRONICS COMPARES THESE TWO TEMPERATURES AND...

Flow Switch / + Temperature Sensor The CF12 series was designed to detect the flow of liquids and gases (air) in pipes or ducts and may also be used for liquid level detection. The CFT12 model offers the same function as the CF12, but it can also measure the temperature of the medium (providing a 4...20mA output) while detecting whether or not there is flow within the pipe or duct. Output: SPDT Relay SPDT Relay (Flow detection) THE MOVEMENT OF A LIQUID OR A GAS AS IT FLOWS OVER THE TIP OF THE SWITCH DISPERSES SOME OF THERMAL ENERGY THAT IS GENERATED BY THE SWITCH. THE UNIT ALSO GENERATES A...

Flow Transmitter The CF420 line of flow transmitters are used to monitor the approximate rate of liquid flows by providing a 4...20mA analog output that reflects the velocity rate of the flow. While this model is not a substitute for a true flow meter, it can be an ideal solution when the application does not call for the accuracy of a more expensive flow meter technology. Zero & Span Zero & Span THERMAL DISPERSION TRANSMITTERS GENERATE HEAT FROM THE TIP OF THE SENSOR AND THEN DETECT AND MEASURE THE HEAT LOSS AS THE MEDIUM PASSES OVER IT. THE AMOUNT OF HEAT LOSS IS MEASURED TO DETERMINE THE...

Tuning Fork Point Level Detection VTKR / VTK-DC / MVTK-DC / MVTK-AC Sitron VTK series of vibrating tuning forks are an ideal solution for many point level detection applications because they are un-affected by either the dielectric or the conductivity of the medium. Users around the world have come to depend on this technology as one that is easy to apply and very reliable. Output: SPDT Relay VTKR/EX Proof Output: Relay (NO+NC) Output: Load switching in series WHEN THE TUNING FORK IS SUBMERGED IN THE MEDIUM THE FREQUENCY AT WHICH IT VIBRATES IS ALTERED. THIS CHANGE IS DETECTED BY THE UNIT'S...

Conductive Point Level Switch The CN line of Conductive Level Switches have up to two active rods and one for reference for level control of all conductive media and are available in both AC and DC power supplies. The electronics and relay are integrated into the housing so that there is no need to use a remote controller. This line can be configured with fixed or removable 316SS (PTFE coated or bare) rods or a 316SS electrode encased in a polyacethal enclosure hung from PVC cables (for longer insertion lengths). Output: SPDT Relay Adjust: Sensibility and Delay Output: SPDT Relay CONDUCTIVE...

Conductive Level Switch The EL line of conductive level switches offer up to six points of active control (active rod/s + 01 reference) for all types of conductive media. This line can be configured with fixed or removable 316SS (PTFE coated or bare) rods or a 316SS electrode encased in a polyacethal enclosure hung from PVC cables (for longer insertion lengths). All units require a separate panel relay for process control. Sitron offers models with various options such as multiple relays, delay and sensitivity Probe: Fixed rod / Removible Pendular electrode General Specifications: Level...

Opto Electronic Level Switch The SOP400 Series opto eletronic level switches are used for level detection in liquids, independent of physical characteristics such as density, dielectric constant or the conductivity of the medium. The SOP400 series provides an accurate, repeatable point level switch which can be mounted in any position, especially where space is limited. This unit is often the ideal solution for point level detection of all types of industrial and food grade oil products. Remote Relay THE SENSOR CONTAINS AN INFRARED LED TRANSMIT- TER AND A LIGHT RECEIVER. THE LIGHT FROM THE...

Capacitive Level Switch Capacitive level switches are designed to detect and control the level of liquid media, solids, powders, pastes and corrosive liquids among others. This technology is immune to build up along the rod, false alarms, temperature variations and condensation. Capacitive level switches work well for liquids or solids with a low or high dielectric and are also ideally applied in corrosive mediums as they can be configured entirely in plastic. Ouput: SPDT Relay Adjust: Sensibility Adjust: Sensibility THE TIP OF THE PROBE GENERATES A CAPACITIVE FIELD. AS THE MEDIUM...

Capacitive Level Switch The SC400 + LV400 and the SC850 are designed to detect the level of a wide variety of solids or liquids. Built with high mechanical resistance, both units are well suited for high pressure and high temperature applications and can be applied in various products such as oils, chemicals, cement, sand, coal, grains, etc. For level detection of aggressive or corrosive products, the insertion length and connection can be coated with PTFE. Adjust: Sensibility Remote Relay Output: SPDT Relay Adjust: Sensibility The SC850 was designed to detect and control the level of all...