Automatic hydraulic screen filters suitable for all applications, and available in a wide range of micron sizes, all with the same high quality guarantee of AZUD. Energy Efficient: The consumption of water in the flushing cycle is minimal. Wide selection of screens: Screens available from 80 to 1000 micron. Versatility: Inlet/Outlet from 4" to 12" // 100-300 mm. Resistance: Temperatures to 60º C (140º F). Large screen area: Up to 12000 cm2 (1860 in2). Resistant material: The screen is manufactured in high quality stainless steel. Time saving: The filtration process and the flushing cycle occur simultaneously. Easy installation: The filters are delivered to be installed. There are solutions available for working with pressures higher than 1 bar / 145 psi or saline water. Control unit is included. TECHNOLOGY AZUD LUXON filters continue to supply filtered water without interruption during the flushing cycle. The water flows through the inlet (1) and enters through the pre-filter (2) to the inside of the filter element. The water then passes through the screen (3), and the particles are retained on the inside of the filter element (screen). The filtered water then flows out through the outlet (4). When the pressure differential from inlet to outlet of the filter reaches the pre-selected level the flushing cycle starts. A hydraulic valve opens in the drain port, which initiates suction in the inner nozzles (5). This, along with the helical movement up and down the screen sucks the captured particles into the waste flow, and this is expelled out the drain port. (6) T h e l e n g t h o f t h e fl u s h cy cl e i s pre-determined by the control unit. When the cycle is complete the flush valve closes and the flushing ends. The flushing process uses a minimal amo

AZUD LUXON MFH MATERIAL Housing of the filter Inlet - Outlet Flange Drainage Female - Thread Drainage Valve Sealing elements Stainless Steel AISI-316-L. Molded screen. Filtering Surface 1" BSP Triple effect. Manufactured in technical plastic Battery or 220V AC control unit included. All models are with flange connections. DIN 2576. Ask for the rest of configurations in www.azud.com Max. Pressure 10 bar / 145 psi • Min. pressure 2.5 bar / 36.3 psi Max. temperature 60 ºC / 140 ºF CONNECTION Inlet - Outlet Flange FLUSHING CYCLE FILTRATION Filtering Surface 2 Flow rate The flow rate given by filter conditions...