Type D_ Milk_Cooling_

Product catalog summary

Overview: The D Type Gear Motor is specifically designed for milk tank agitation, recommended for tanks with capacities ranging from 1000 to 2500 liters. It offers excellent resistance to the agitator's swinging motion and can be customized according to the specifications of the agitation blade.

Applications: This gear motor is used for the motorization of milk agitation blades.

Technical Features:

Available in two mountings as per the drawing.
Equipped with a 2-pole motor and Class F insulation.
IP44 protection rating.
Available in single-phase with a permanent capacitor or three-phase configurations.
Permanently lubricated with two directions of rotation.
Includes a thermal cut-out and a terminal box with four positions.

Motor Specifications:

Single Phase with Capacitor: 230 V-50 Hz, with various nominal torque and output power specifications.
Three Phase: 230/400 V, 50 Hz, with different speed, rated current, and torque specifications.

Additional Options:

Separated thermal cut-out for both single and three-phase motors.
IP55 protection available.
Customizable output shaft to suit the agitator.
Special voltages and frequencies (60 Hz and 50-60 Hz) available.
Micro-switch incorporated in the terminal box.
Mounting options with specific hole and diameter configurations.

Catalog excerpts

D TYPE - GEAR MOTOR GEAR MOTOR FOR MILK TANK Recommended for small capacity milk tanks : from 1000 to 2500 liters Specifically designed for milk agitation : excellent resistance to the agitator’s swinging Output shaft according to the specifications of your agitation blade (length & diameter) AGITATION BLADE Technical features : Technical features AVAILABLE Rated moment m.daN Maximum load on slowshaft (1) 2 POLE MOTOR CLASS F INSULATION IP44 PROTECTION SINGLE PHASE MOTOR WITH PERMANENT CAPACITOR OR THREE PHASE PERMANENTLY LUBRICATED 2 DIRECTIONS (1) Applied in the middle of the shaft end * Torque not to be exceeded THERMAL CUT-OUT TERMINAL BOX : 4 POSITIONS Non-contractual photographs Single phase Three phase Nominal with capacitor 230/400 V torque cm.N 50 Hz 230 V-50 Hz

Open the catalog to page 1

D TYPE - GEAR MOTOR Options : SEPARATED THERMAL CUT-OUT (SINGLE AND THREE PHASE) IP55 PROTECTION OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS SUITABLE TO THE AGITATOR SPECIAL VOLTAGES AND FREQUENCIES (60 HZ AND 50-60 HZ) MICRO-SWITCH INCORPORATED IN THE TERMINAL BOX TERMINAL BOX position (standard) MOUNTING “2” with 4 holes M6 at 90° on Ø94 - adjusting ØN

Open the catalog to page 2

All SIREM catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list