MOTOREDUCTEUR - TYPE H

Product catalog summary

Overview: This document provides technical specifications and features of the H Type Gear Motor manufactured by SIREM, located in Saint Maurice de Beynost, France. The gear motor is designed for various applications including motorized fences, agitators, and textile machines.

Specifications:

Power: 44 watts
Speed Range: 2.3 to 200 RPM
Torque Range: 0.14 to 3.5 daN.m
Protection Class: IP44 standard, optional IP55
Insulation: Class B standard, optional Class F
Operating Temperature: -20°C to +85°C
Relative Humidity: Up to 95%

Technical Features:

Asynchronous motor with permanent lubrication
Thermal cut-out for safety
Reversible gearbox with parallel gears
Massive shaft design
Two directions of rotation

Options:

Inrush or lack of current brake (24V or 230V with diode rectifier), with or without manual unlocking
Custom voltages and frequencies
Output shaft customization

Compliance: The gear motor complies with standards EN 60 335-1, EN 60034-1, and CE marking.

Mounting Options:

Mounting "2" with 4 holes M6 at 90° on Ø110 - adjusting on ØN
Mounting "1" with lug

Motor Characteristics:

Single-phase motor with capacitor
Three-phase motor option
Characteristic curve indicates Cmax = 2.5 Cn

Designation: The gear motor designation includes additional features such as brake fitting and terminal box position. The product code includes information on motor type, number of poles, and stator size.

Catalog excerpts

H TYPE - GEAR MOTOR 44 watts 2,3 to 200 RPM 0,14 to 3,5 daN.m Bulk dimensions Reversible gearbox with parallel gears Massive shaft Applications : •Motorized fence •Agitator •Textile Machines Technical features : •Asynchronous motor 4 oblong holes 8x19 •Permanently lubricated •Thermal cut out •2 directions of rotation •Classe B insulation •IP44 protection •Working temperature : -20°C to +85°C •Relative hygrometrie until 95% Options available on demand : •Inrush or lack of current brake MOUNTING "2" with 4 holes M6 at 90° on Ø110 - adjusting on ØN (24 v or 230 v with diode rectifier) with or without manual unlocking •Voltages and frequencies on request •Classe F insulation •IP55 protection •Output shaft according to specifications MOUNTING "1" with lug Complies with standards : •En 60 335-1 •En 60034-1 •CE PHOTOGRAPHS ARE NON-CONTRACTUAL

Open the catalog to page 1

GEAR MOTOR DESIGNATION STANDARD MASSIVE SHAFT Three phases motors : Acceptable torque not lo exceed Applied on Hie middle ortne

Open the catalog to page 2

All SIREM catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list