M TYPE - GEAR MOTOR

Product catalog summary

Overview: The document provides technical specifications and features of the M Type Gear Motor by SIREM, designed for various industrial applications such as automatic barriers, packaging machines, and dough mixers.

Specifications:

Power: 145 watts
Speed Range: 10 to 340 RPM
Torque: 0.17 to 5.3 daN.m
Insulation: Class B, with optional Class F
Protection: IP44, with optional IP55
Operating Temperature: -20°C to +85°C
Relative Humidity: Up to 95%

Technical Features:

Asynchronous motor with permanent lubrication
Thermal cut-out and reversible gearbox with parallel gears
Massive shaft and two directions of rotation

Options:

Inrush or lack of current brake (24V or 230V with diode rectifier)
Custom voltages and frequencies
Output shaft specifications

Compliance: The gear motor complies with standards EN 60 335-1, EN 60034-1, and CE.

Mounting Options:

Mounting "2" with 3 M6 at 90° on Ø108.5
Mounting "4" with 3 M6 at 90° on Ø108.5
Mounting "6" with 4 holes Ø7 at 90° on Ø110
Mounting "1" with lug

Additional Designations:

R1C: Single phase motor with capacitor
R3: Three phases motor
F: Fitted with a brake
R: Reinforced motor

Characteristic Curve: The document includes a characteristic curve of a SIREM asynchronous motor, indicating that the maximum torque (Cmax) is 2.5 times the nominal torque (Cn).

Catalog excerpts

M TYPE - GEAR MOTOR 145 watts Bulk Dimensions Reversible gearbox with parallel gears Massive shaft Applications : •Automatic barriers •Packaging machines •Dough mixers Technical features : •Asynchronous motor •Permanently lubricated •Thermal cut out •2 directions of rotation •Class B insulation •IP44 protection •Working temperature : -20°C to +85°C • Relative hygrometry until 95% MOUNTING "2" with 3 M6 Options available on demand : •Inrush or lack of current brake (24 v or 230 v with diode rectifier) with or without manual unlocking •Voltages and frequencies on request •Class F insulation •IP55 protection •Output shaft according to specifications MOUNTING "6" with 4 holes Ø7 at 90° on Ø110 Complies with standards : •En 60 335-1 •En 60034-1 •CE PHOTOGRAPHS ARE NON-CONTRACTUAL

Open the catalog to page 1

GEAR MOTOR DESIGNATION STANDARD MASSIVE SHAFT

Open the catalog to page 2

All SIREM catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list