Industry_Range
4Pages

MOTORIZATIONS DESIGNER DUSTRY RANGE GEAR MOTORS CENTRIFUGAL PUMPS

Gear motors Type D Type F Speed : _________10 to 300 rpm Torque :_________0.5 to 12 N.m. Output shaft : ____massive Dimensions :_____L : 155 mm Ø : 120 mm - Edge coloring machines for leather industry - Drum agitators - Gasket cutters - Dry feeder for polymer preparations - Traps Speed :__________2.3 to 200 rpm Torque :_________1.4 to 35 N.m Output shaft : ____massive Dimensions :_____L : 220 mm Ø : 120 mm - Barbecue - Water treatment - Voltage set-point (transformers) - Bakery equipment - Turning tables Speed :__________10 to 340 rpm Torque :_________1.7 to 53 N.m Output shaft :...

Centrifugal Pumps Type A Type E Q max :___________5 m3/hr H max :___________8 m T° : ______________-20 to +150°C Material : _________AS13 Impeller : _________open Dimensions :______L max: 200 mm Ø : 125 mm - Hot oils (olive oil, ...) - Hydrogen peroxide up to 90% - Pharmaceutical products** - Hydrocarbons (kerosene, diesel, gasoline...) - Solvents (white spirit, turpentine...) - Drinks (beer, whisky, milk) Q max :___________10 m3/hr H max :___________22 m T° : ______________-5 to +90°C Material : _________PP Impeller : _________closed Dimensions :______L max : 290 mm Ø : 180 mm - Plating...

Speed : __________2.6 to 40.4 m.min-1 Torque :__________1 to 21.2 N.m Length :__________250 to 1000 mm Protection : _______IPX5 Materials : ________steel/inox/aluminium - Supermarket Checkouts Speed :___________6.8 to 11.3 m.min-1 Torque :__________16.5 to 27.5 N.m Length :__________328 to 600 mm Protection : _______IPX5 Materials : ________steel/inox/aluminium Speed :___________3.6 to 21.7 m.min-1 Torque : __________5.6 to 31.8 N.m Length : __________500 to 1500 mm Protection : _______IP66 Materials : ________steel Speed :___________3.1 to 46.9 m.min-1 Torque :__________1.1 to 17.2 N.m...