FT_Type L Tank

Product catalog summary

Overview: The L Type Gear Motor is specifically designed for milk tanks with capacities ranging from 3000 to 6000 liters. It is compact, easy to mount, and available in a reinforced version for enhanced mechanical performance. The output shaft can be customized to fit the specifications of the milk agitation blade.

Application: This gear motor is used for the motorization of the milk agitation blade.

Technical Features:

Three mounting options, including an off-center flange.
2-pole motor with Class F insulation and IP44 protection.
Equipped with a thermal cut-out.
Available in single-phase with a permanent capacitor or three-phase.
Permanently lubricated with two directions of rotation.
Terminal box with four positions.

Motor Specifications:

Single-phase with capacitor: 230 V-50 Hz.
Three-phase: 230/400 V, 50 Hz.
Various rated moments, output power, speed, and current specifications are provided for different models.

Options:

Separated thermal cut-out for single or three-phase.
IP55 protection.
Customizable output shaft for the agitator.
Special voltages and frequencies (60 Hz and 50/60 Hz).
Micro-switch incorporated in the terminal box.
Reinforced motor with the first gear in metal.

Mounting Options:

Mounting “5”, “1”, and “7” with specific configurations.
Standard terminal box position with three lights at 90°.

Catalog excerpts

L TYPE - GEAR MOTOR GEAR MOTOR FOR MILK TANK Recommanded for milk tanks with capacity of 3000 to 6000 liters Small and compact Ease mounting Reinforced version for better mechanical features Output shaft according to the specifications of your agitation blade (length & diameter) Application : MOTORIZATION OF THE MILK AGITATION BLADE Technical features Technical features : 3 MOUNTINGS AVAILABLE, INCLUDING AN OFF- CENTER FLANGE : Maximum load on slowshaft (1) CLASS F INSULATION IP44 PROTECTION Rated moment m.daN (1) Applied at 21mm from the shaft end SINGLE PHASE MOTOR WITH PERMANENT CAPACITOR OR THREE PHASE Single phase Three phase Rated with capacitor 230/400 V moment cm.N 50 Hz 230 V-50 Hz Speed Rated n1 current RPM 230 V - A PERMANENTLY LUBRICATED Motor features THERMAL CUT-OUT Non-contractual photographs

Open the catalog to page 1

L TYPE - GEAR MOTOR Options : SEPARATED THERMAL CUT-OUT (SINGLE OR THREE PHASE) IP55 PROTECTION OUTPUT SHAFT ACCORDING TO THE SPECIFICATIONS SUITABLE TO THE MOUNTING “7” with 3 holes M6 at 120° on Ø70 SPECIAL VOLTAGES AND FREQUENCIES (60 HZ AND 50/60 HZ) MICRO-SWITCH INCORPORATED IN THE TERMINAL BOX REINFORCED MOTOR (1ST GEAR IN METAL)

Open the catalog to page 2

All SIREM catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list