FT RL113
2Pages

Diameter : Ø113 mm Speed : 0,9 m/s-0,11m/s-0,13m/s-0,15 m/s Length : 250 to 600 mm Drum motor Ø113 Load up to 200 kg Life duration : 10 millions of cycles Maintenance free Silent Low energy consumption Applications : •Checkout counters •Conveyors The RL113 drum motor comes with a standard MOLEX connector (can be purchased in any store) for a simplified connection to your own customized cable extension. Technical features : •Asynchronous motor Drum designation : Drum motor symbol •Thermal cut-out Reduction ratio •Aluminium tube x = Stator type J or K M = Single phase motor •MOLEX standard connectors •IP67 protection •Working temperature : Installations and using recommendations To adjust the tension of the conveyor belt : Switch on the conveyor with the maximum load on the belt. Tight the belt until the load moves. Finish the adjustment by the tightening of screws while keeping the belt centered. •Relative hygrometry until 95% Options available on demand : •Specific coating •Drum length •Extension cable length •specific voltages and frequencies α Complies with the standards : E In a permanent concern for compliance with requirements of sustainable development and reducing operating costs, the power consumption of this drum motor has been reduced by 15%.

Bulk dimensions Output power (watts) Linear speed Reduction ratio Tube length Service (mm) class * in service class S3 : (15 cycles per min, 50% of maximum load, 8hour/day) ** do not exceed this intensity in service class S1 For the length 250mm only 75 W version available Electrical diagrams Single phase 230V • Do not use the drum motor without belt (risk of overheat) • Do not vulcanize the drum motor • Connect the thermal switch in series with the supply of the coil from the motor contactor • The conveyor length must not exceed 2 meters S I R E M - C h e m i n d u P i l o n - 0 1 7 0 0 -...