Brass Ball Valves for Actuators with Mounting Pad ISO5211

Product catalog summary

Overview: This document provides technical specifications and details for V3000 series brass ball valves designed for actuators. These valves are suitable for use with water, air, vacuum, and non-corrosive fluids, and are compatible with both electric and pneumatic actuators.

Specifications:

Nominal Pressure: PN16
Temperature Range: -20°C to +80°C
Thread Standard: ISO 7/1
Flange and Fixing Holes Standard: ISO 5211

Special designs are available upon request, and Siral S.p.A. can evaluate requests for specific fluids.

Technical Details:

Valve Sizes: From 1/4" to 2"
Materials: Body and fittings in stamped brass CW617N, ball in chrome-plated brass CW614N, ball seat in PTFE, O-rings in FPM, flat seal in PTFE with 15% fiberglass reinforcement, stem in brass CW614N, square adaptor in steel 9S Mn Pb 36 for 3-way valves.

Flow and Pressure Data:

Flow Rate (Kv and Cv values) provided for different valve sizes, indicating capacity in m3/h at a pressure drop of 1 Bar and in US gallons per minute at a pressure drop of 1 PSI.
Drop curves and flow rate pressure diagrams are included to illustrate performance characteristics.

Additional Information: Siral S.p.A. reserves the right to modify designs without prior notice. Contact information for Siral S.p.A. is provided for further inquiries.

Catalog excerpts

Brass Ball Valves for Actuators with Mounting Pad ISO5211-1

BAL L VALVES FOR ACTUATOR l iquid fire gas 4 VALVOLE A SFERA PER ATTUATORI 07 KUGE LHAHNE FUR ANTRI EBE V3000 ISO f rom 1/ 4 " to 2" 4 ¨ ¨

Open the catalog to page 1

Brass Ball Valves for Actuators with Mounting Pad ISO5211-2

Kugelhähne aus Messing mi t vol lem Durchgang Zweiwegeform, Dreiwegeform mi t L-Bohrung und Dreiwegeform mi t T-Bohrung, mi t geringem Drehmoment , verwendbar für elektrische und pneumat ische Antriebe. Kugelhähne für Wasser, Luf t , Vakuum und nichtätzende Medien im Al lgemeinen. Technische Daten: · Nenndruck: PN16 · Temperaturberei tch: -20°C/+80°C · Gewinde nach ISO 7/1 · Aufbauf lansch und Befestigungsbohrungen nach ISO 5211 Sonderausführungen auf Anfrage. Die Auf l istung der Medien hat al lgemeinen Charakter. Siral S.p.A. steht für Bewer tung von Anfragen für speziel le Medien zur Ver fügung....

Open the catalog to page 2

Brass Ball Valves for Actuators with Mounting Pad ISO5211-6

Via F. Lana 21/29 - 25065 LUMEZZANE S.S. (Brescia) Tel. +39 030 8251211 - Fax: +39 030 8251247 - C.P. 125 [email protected] - www.siral.com

Open the catalog to page 6

Brass Ball Valves for Actuators with Mounting Pad ISO5211

Brass Ball Valves for Actuators with Mounting Pad ISO5211

Catalog excerpts

All SIRAL catalogs and technical brochures