SINCRO BLOC Integrated Blowing / Filling / Capping System
7Pages

SINCRO BLOC Integrated Blowing / Filling / Capping System

Sincro Bloc combines the highest output today in the market with the maximum container quality keeping reduced footprint, simplicity and hygiene. Sincro Bloc Fresh milk Carbonated water Non-Carbonated water Hygiene: a preform treatment system, the short connection between blowing and filling, the Cost effective investment: all these features and advantages make Sincro Bloc one of the best solutions both in terms of capex and as a guarantee of general TCO reduction. Isotonic and sport drinks Lightweight: Sincro Bloc is the most suitable solution for the treatment of extreme lightweight...

Preform hygiene control: Bottle Blowing SFR EVO³: features and advantages Preform transport system - Simple chain in special plastic material (SIPA patent). No maintenance cost and time. - No rotation of chain around its axis and no movement up and down to collect the preform. - Dry operation (no grease). - Pitch = 45 mm: better efficiency of heating, shorter oven and possibility to blow up to 43 mm neck finish. - Quick tool-free spindle changeover when handling different preform neck. - Very low maintenance cost. Heating Oven - Modular oven completely made in aluminum. - Fresh air is blown...

“Lightweight” bottles Sincro Bloc, thanks to its direct connection between bottle blowing and filling, is the perfect solution in case of lightweighting necks and bottles. Connection Transfer module The blowmolder and filler are electronically synchronized and physically connected by a transfer module. The latter is composed of transfer starwheels with grippers which transport the bottles by the neck to the filling monoblock. This solution offers the following main advantages: - Extreme reliability: no hitches. - Great flexibility: it can handle bottles of all shapes. - Body guides are no...

Stillfill S Stillfill HR Isofill Flextronic C Flextronic S Flextronic SC Flextronic SE Flextronic W Bigfill Alcoholic beverages The possibility to keep the bottle clean after blowing is an extremely important element. Bearing this in mind several solutions can be integrated in order to keep under control the filling environment: - Overpressure sterile air cabins with contamination control equipped with HEPA filters. Our standard starts with ISO class 7 but according to the hygiene level required by the customer, this level can be increased up to ISO class 5. - The transfer module and filler...

Special configuration composed of Capstream, a cap quality check device and oriented cap horizontal buffering system up to the pick and place feeding channels. Cap handling solutions The last element in the process is the capping machine, which, synchronized with the filler, closes the bottles prior to outfeed. The management and correct feed of caps in the pick and place area is one of the most sensitive phases in the whole process in terms of risk of blockage on the descent channel. Since the whole process is fully synchronized we have designed several solutions to avoid stoppages on the...

SINCRO BLOC SIPA Filling & Packaging Division Via Provinciale, 36 43038 Sala Baganza (PR) - ITALY Tel: +39 0521 548111 Fax: +39 0521 548112 E-mail: sipa@zoppas.com Website: www.sipa.it SIPA Luxembourg S.A. 2°, rue du Commerce – Ecostart 2 Centre d’Entreprise et d’Innovation L-3895 FOETZ / Luxembourg Tel: +352 26 55 16 89 Fax: +352 26 55 09 60 E-mail: sipa@zoppas.com SIPA NORTH AMERICA 4341 International Parkway Suite 110 Atlanta, Georgia 30354 - U.S.A. Tel: +1 404 3493966 Fax: +1 404 5745568 E-mail: sales.northamerica@zoppas.com SIPAMERICAN INDUSTRIES Circuito Mexico 120 Parque Industrial...