• Measurement Range: 0 m to ≥ 5 m
• Resolution: 5 pm (with some devices limited to 0.3 nm)
• Angular Measurement Range: With reflector: ±12.5° (SP 5000 DI) / ±15° (SP 5000 DI/F); With plane mirror: ±430 µrad (recommended distance ≤2 m)
• Angular Resolution: 0.005 µrad (SP 5000 DI) / 0.007 µrad (SP 5000 DI/F)
• Beam Distance: 21 mm (SP 5000 DI) / 14 mm (SP 5000 DI/F)
• Temperature Sensitivity: <20 nm/K (SP 5000 DI) / <10 nm/K (SP 5000 DI/F)
• Wavelength: 632.8 nm
• Frequency Stability: 2·10-8 after warm-up
• Warm-up Time: 10 to 20 minutes
• Operating Temperature Range: 15 to 30°C
• Maximum Displacement Speed: 3 m/s

• Sensor Head Dimensions: 150 x 140 x 43 mm (SP 5000 DI) / 110 x 65 x 33 mm (SP 5000 DI/F)
• Reflector Dimensions: Ø 15 mm x 15 mm (SP 5000 DI) / Ø 10 mm x 15 mm (SP 5000 DI/F)
• Electronic Evaluation Unit Dimensions: 450 x 400 x 150 mm
• Mass: Sensor head: 2.0 kg (SP 5000 DI) / 1.1 kg (SP 5000 DI/F); Base plate: 1.5 kg; Reflector: 8 g (SP 5000 DI) / 6 g (SP 5000 DI/F); Electronic unit: approx. 8 kg

• Interfaces: RS232C, USB (other interfaces on request)
• Cable Length: 6 m (other lengths on request)
• Power Supply: 100 to 240 VAC / 47 to 63 Hz
• Laser Safety Class: 2M according to EN 60825-1:2014 and ANSI Z136.1 (CDRH)

Note: Specifications are subject to change. Devices with limited resolution are marked with an 'X' on the type label.